ꦫꦣꦺꦤ꧀ꦄꦤ꧀ꦠꦱꦺꦤ

PATH: etc

###
### Sample Wget initialization file .wgetrc
###

## You can use this file to change the default behaviour of wget or to
## avoid having to type many many command-line options. This file does
## not contain a comprehensive list of commands -- look at the manual
## to find out what you can put into this file. You can find this here:
##   $ info wget.info 'Startup File'
## Or online here:
##   https://www.gnu.org/software/wget/manual/wget.html#Startup-File
##
## Wget initialization file can reside in /etc/wgetrc
## (global, for all users) or $HOME/.wgetrc (for a single user).
##
## To use the settings in this file, you will have to uncomment them,
## as well as change them, in most cases, as the values on the
## commented-out lines are the default values (e.g. "off").
##
## Command are case-, underscore- and minus-insensitive.
## For example ftp_proxy, ftp-proxy and ftpproxy are the same.

##
## Global settings (useful for setting up in /etc/wgetrc).
## Think well before you change them, since they may reduce wget's
## functionality, and make it behave contrary to the documentation:
##

# You can set retrieve quota for beginners by specifying a value
# optionally followed by 'K' (kilobytes) or 'M' (megabytes).  The
# default quota is unlimited.
#quota = inf

# You can lower (or raise) the default number of retries when
# downloading a file (default is 20).
#tries = 20

# Lowering the maximum depth of the recursive retrieval is handy to
# prevent newbies from going too "deep" when they unwittingly start
# the recursive retrieval.  The default is 5.
#reclevel = 5

# By default Wget uses "passive FTP" transfer where the client
# initiates the data connection to the server rather than the other
# way around.  That is required on systems behind NAT where the client
# computer cannot be easily reached from the Internet.  However, some
# firewalls software explicitly supports active FTP and in fact has
# problems supporting passive transfer.  If you are in such
# environment, use "passive_ftp = off" to revert to active FTP.
#passive_ftp = off
passive_ftp = on

# The "wait" command below makes Wget wait between every connection.
# If, instead, you want Wget to wait only between retries of failed
# downloads, set waitretry to maximum number of seconds to wait (Wget
# will use "linear backoff", waiting 1 second after the first failure
# on a file, 2 seconds after the second failure, etc. up to this max).
#waitretry = 10

##
## Local settings (for a user to set in his $HOME/.wgetrc).  It is
## *highly* undesirable to put these settings in the global file, since
## they are potentially dangerous to "normal" users.
##
## Even when setting up your own ~/.wgetrc, you should know what you
## are doing before doing so.
##

# Set this to on to use timestamping by default:
#timestamping = off

# It is a good idea to make Wget send your email address in a `From:'
# header with your request (so that server administrators can contact
# you in case of errors).  Wget does *not* send `From:' by default.
#header = From: Your Name <username@site.domain>

# You can set up other headers, like Accept-Language.  Accept-Language
# is *not* sent by default.
#header = Accept-Language: en

# You can set the default proxies for Wget to use for http, https, and ftp.
# They will override the value in the environment.
#https_proxy = http://proxy.yoyodyne.com:18023/
#http_proxy = http://proxy.yoyodyne.com:18023/
#ftp_proxy = http://proxy.yoyodyne.com:18023/

# If you do not want to use proxy at all, set this to off.
#use_proxy = on

# You can customize the retrieval outlook.  Valid options are default,
# binary, mega and micro.
#dot_style = default

# Setting this to off makes Wget not download /robots.txt.  Be sure to
# know *exactly* what /robots.txt is and how it is used before changing
# the default!
#robots = on

# It can be useful to make Wget wait between connections.  Set this to
# the number of seconds you want Wget to wait.
#wait = 0

# You can force creating directory structure, even if a single is being
# retrieved, by setting this to on.
#dirstruct = off

# You can turn on recursive retrieving by default (don't do this if
# you are not sure you know what it means) by setting this to on.
#recursive = off

# To always back up file X as X.orig before converting its links (due
# to -k / --convert-links / convert_links = on having been specified),
# set this variable to on:
#backup_converted = off

# To have Wget follow FTP links from HTML files by default, set this
# to on:
#follow_ftp = off

# To try ipv6 addresses first:
#prefer-family = IPv6

# Set default IRI support state
#iri = off

# Force the default system encoding
#localencoding = UTF-8

# Force the default remote server encoding
#remoteencoding = UTF-8

# Turn on to prevent following non-HTTPS links when in recursive mode
#httpsonly = off

# Tune HTTPS security (auto, SSLv2, SSLv3, TLSv1, PFS)
#secureprotocol = auto

[+] grub.d
[-] odbc.ini [edit]
[+] rcS.d
[+] security
[+] apparmor
[-] crypttab [edit]
[-] profile [edit]
[-] overlayroot.conf [edit]
[-] host.conf [edit]
[+] update-motd.d
[+] python3
[-] mime.types [edit]
[+] letsencrypt
[+] default
[+] dconf
[-] multipath.conf [edit]
[+] opt
[-] fstab [edit]
[+] pki
[+] audisp
[-] issue [edit]
[+] mdadm
[-] locale.gen [edit]
[+] cron.hourly
[+] insserv.conf.d
[+] sudoers.d
[+] network
[-] magic [edit]
[+] networkd-dispatcher
[+] selinux
[-] hosts.allow [edit]
[+] calendar
[+] rc3.d
[+] depmod.d
[-] fuse.conf [edit]
[+] dbconfig-common
[+] binfmt.d
[-] rsyslog.conf [edit]
[+] skel
[+] apt
[-] resolv.conf [edit]
[-] kernel-img.conf [edit]
[+] audit
[+] apache2
[+] lvm
[-] debconf.conf [edit]
[+] update-manager
[+] update-notifier
[+] newt
[-] subuid- [edit]
[-] group- [edit]
[+] ssl
[+] dpkg
[-] rmt [edit]
[-] crontab [edit]
[+] terminfo
[+] rc0.d
[+] rc6.d
[-] mtab [edit]
[-] modules [edit]
[-] ec2_version [edit]
[+] ..
[+] ca-certificates
[-] passwd- [edit]
[+] dhcp
[-] shadow- [edit]
[+] NetworkManager
[-] shadow [edit]
[-] hibinit-config.cfg [edit]
[+] pollinate
[-] machine-id [edit]
[-] hosts [edit]
[+] ufw
[-] protocols [edit]
[-] overlayroot.local.conf [edit]
[-] environment [edit]
[+] multipath
[+] ODBCDataSources
[+] bash_completion.d
[-] mke2fs.conf [edit]
[-] os-release [edit]
[+] cron.daily
[-] gshadow- [edit]
[-] ca-certificates.conf [edit]
[+] kernel
[+] tmpfiles.d
[-] sudoers [edit]
[+] cron.d
[-] logrotate.conf [edit]
[+] alternatives
[-] timezone [edit]
[+] emacs
[+] cron.monthly
[+] rc2.d
[-] bash_completion [edit]
[-] libaudit.conf [edit]
[-] magic.mime [edit]
[-] mailcap [edit]
[-] login.defs [edit]
[+] console-setup
[-] services [edit]
[-] shells [edit]
[+] logrotate.d
[-] lsb-release [edit]
[-] pam.conf [edit]
[+] logcheck
[-] ltrace.conf [edit]
[+] sos
[+] netplan
[+] lighttpd
[+] ssh
[+] sysctl.d
[+] fonts
[+] modprobe.d
[+] mysql
[-] subgid- [edit]
[+] ubuntu-advantage
[+] iproute2
[+] iscsi
[+] systemd
[-] ld.so.cache [edit]
[-] deluser.conf [edit]
[+] vmware-tools
[+] vim
[-] locale.alias [edit]
[+] cloud
[-] networks [edit]
[-] subuid [edit]
[-] adduser.conf [edit]
[-] issue.net [edit]
[-] at.deny [edit]
[+] PackageKit
[+] X11
[+] cryptsetup-initramfs
[+] polkit-1
[-] gshadow [edit]
[-] debian_version [edit]
[-] mailcap.order [edit]
[-] inputrc [edit]
[+] perl
[+] initramfs-tools
[+] php
[+] ldap
[+] apport
[-] rpc [edit]
[-] subgid [edit]
[+] init.d
[-] .pwd.lock [edit]
[-] localtime [edit]
[+] fwupd
[+] landscape
[-] gai.conf [edit]
[-] wgetrc [edit]
[-] bash.bashrc [edit]
[-] odbcinst.ini [edit]
[+] profile.d
[+] rc1.d
[-] manpath.config [edit]
[-] xattr.conf [edit]
[-] hosts.deny [edit]
[-] ucf.conf [edit]
[-] ld.so.conf [edit]
[+] cron.weekly
[-] ethertypes [edit]
[+] acpi
[-] nanorc [edit]
[+] python3.8
[-] ca-certificates.conf.dpkg-old [edit]
[-] hdparm.conf [edit]
[-] hostname [edit]
[-] sysctl.conf [edit]
[+] pm
[-] group [edit]
[-] vtrgb [edit]
[-] nsswitch.conf [edit]
[-] screenrc [edit]
[-] e2scrub.conf [edit]
[+] rc5.d
[-] bindresvport.blacklist [edit]
[+] byobu
[+] dbus-1
[+] pam.d
[+] apparmor.d
[+] phpmyadmin
[-] hibagent-config.cfg [edit]
[-] popularity-contest.conf [edit]
[-] zsh_command_not_found [edit]
[-] legal [edit]
[+] groff
[+] rc4.d
[+] udev
[+] xdg
[+] ld.so.conf.d
[+] modules-load.d
[+] rsyslog.d
[+] gss
[-] passwd [edit]