ꦫꦣꦺꦤ꧀ꦄꦤ꧀ꦠꦱꦺꦤ

PATH: usr / bin

# Copyright (C) 2017-2022 MariaDB
# Copyright (C) 2012-2015 Codership Oy
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; see the file COPYING. If not, write to the
# Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston
# MA  02110-1335  USA.

# This is a common command line parser to be sourced by other SST scripts

trap 'exit 32' HUP PIPE
trap 'exit 3'  INT QUIT TERM

# Setting the path for some utilities on CentOS
export PATH="$PATH:/usr/sbin:/usr/bin:/sbin:/bin"

trim_string()
{
    if [ -n "$BASH_VERSION" ]; then
        local pattern="[![:space:]${2:-}]"
        local x="${1#*$pattern}"
        local z=${#1}
        x=${#x}
        if [ $x -ne $z ]; then
            local y="${1%$pattern*}"
            y=${#y}
            x=$(( z-x-1 ))
            y=$(( y-x+1 ))
            printf '%s' "${1:$x:$y}"
        else
            printf ''
        fi
    else
        local pattern="[[:space:]${2:-}]"
        echo "$1" | sed -E "s/^$pattern+|$pattern+\$//g"
    fi
}

trim_dir()
{
    if [ -n "$BASH_VERSION" ]; then
        local pattern="![:space:]${2:-}"
        local x="${1#*[$pattern]}"
        local z=${#1}
        x=${#x}
        if [ $x -ne $z ]; then
            local y="${1%[$pattern/]*}"
            y=${#y}
            x=$(( z-x-1 ))
            y=$(( y-x+1 ))
            x="${1:$x:$y}"
            [ -z "$x" ] && x='.'
            printf '%s' "$x"
        else
            printf ''
        fi
    else
        local pattern="[:space:]${2:-}"
        local x=$(echo "$1" | sed -E "s/^[$pattern]+|[$pattern/]+\$//g")
        if [ -n "$x" ]; then
            echo "$x"
        elif "${1#*/}" != "$1"; then
            echo '.'
        else
            echo ''
        fi
    fi
}

trim_right()
{
    if [ -n "$BASH_VERSION" ]; then
        local pattern="[![:space:]${2:-}]"
        local z=${#1}
        local y="${1%$pattern*}"
        y=${#y}
        if [ $y -ne $z ]; then
            y=$(( y+1 ))
            printf '%s' "${1:0:$y}"
        else
            printf ''
        fi
    else
        local pattern="[[:space:]${2:-}]"
        echo "$1" | sed -E "s/$pattern+\$//g"
    fi
}

to_minuses()
{
    local x="$1"
    local t="${1#*_}"
    local r=""
    while [ "$t" != "$x" ]; do
       r="$r${x%%_*}-"
       x="$t"
       t="${t#*_}"
    done
    if [ -n "$BASH_VERSION" ]; then
        printf '%s' "$r$x"
    else
        echo "$r$x"
    fi
}

WSREP_SST_OPT_BYPASS=0
WSREP_SST_OPT_PROGRESS=0
WSREP_SST_OPT_BINLOG=""
WSREP_SST_OPT_BINLOG_INDEX=""
WSREP_SST_OPT_LOG_BASENAME=""
WSREP_SST_OPT_DATA=""
WSREP_SST_OPT_AUTH="${WSREP_SST_OPT_AUTH:-}"
WSREP_SST_OPT_USER="${WSREP_SST_OPT_USER:-}"
WSREP_SST_OPT_PSWD="${WSREP_SST_OPT_PSWD:-}"
WSREP_SST_OPT_REMOTE_AUTH="${WSREP_SST_OPT_REMOTE_AUTH:-}"
WSREP_SST_OPT_DEFAULT=""
WSREP_SST_OPT_DEFAULTS=""
WSREP_SST_OPT_EXTRA_DEFAULT=""
WSREP_SST_OPT_EXTRA_DEFAULTS=""
WSREP_SST_OPT_SUFFIX_DEFAULT=""
WSREP_SST_OPT_SUFFIX_VALUE=""
WSREP_SST_OPT_MYSQLD=""
WSREP_SST_OPT_PORT=""
WSREP_SST_OPT_ADDR=""
WSREP_SST_OPT_ADDR_PORT=""
WSREP_SST_OPT_HOST=""
WSREP_SST_OPT_HOST_UNESCAPED=""
ARIA_LOG_DIR=""
INNODB_DATA_HOME_DIR=$(trim_dir "${INNODB_DATA_HOME_DIR:-}")
INNODB_LOG_GROUP_HOME=$(trim_dir "${INNODB_LOG_GROUP_HOME:-}")
INNODB_UNDO_DIR=$(trim_dir "${INNODB_UNDO_DIR:-}")
INNODB_BUFFER_POOL=""
INNODB_FORCE_RECOVERY=""
INNOEXTRA=""

while [ $# -gt 0 ]; do
case "$1" in
    '--address')
        WSREP_SST_OPT_ADDR=$(trim_string "$2")
        #
        # Break address string into host:port/path parts
        #
        case "$WSREP_SST_OPT_ADDR" in
        \[*)
            # IPv6
            # Remove the starting and ending square brackets, if present:
            addr="${WSREP_SST_OPT_ADDR#\[}"
            addr=$(trim_right "${addr%%\]*}")
            # Some utilities and subsequent code require an address
            # without square brackets:
            readonly WSREP_SST_OPT_HOST_UNESCAPED="$addr"
            # Square brackets are needed in most cases:
            readonly WSREP_SST_OPT_HOST="[$addr]"
            # Mark this address as IPv6:
            readonly WSREP_SST_OPT_HOST_IPv6=1
            # Let's remove the leading part that contains the host address:
            remain="${WSREP_SST_OPT_ADDR#*\]}"
            ;;
        *)
            addr=$(trim_right "${WSREP_SST_OPT_ADDR%%[:/]*}")
            readonly WSREP_SST_OPT_HOST="$addr"
            readonly WSREP_SST_OPT_HOST_UNESCAPED="$addr"
            readonly WSREP_SST_OPT_HOST_IPv6=0
            # Let's remove the leading part that contains the host address:
            remain="${WSREP_SST_OPT_ADDR#*[:/]}"
            ;;
        esac
        # If there is nothing but the address, then the remainder is empty:
        [ "$remain" = "$WSREP_SST_OPT_ADDR" ] && remain=""
        # Let's remove the ":" character that separates the port number
        # from the hostname:
        remain="${remain#:}"
        # Extract the port number from the address - all characters
        # up to "/" (if present):
        WSREP_SST_OPT_ADDR_PORT="${remain%%/*}"
        # If the "/" character is present, then the path is not empty:
        if [ "$WSREP_SST_OPT_ADDR_PORT" != "$remain" ]; then
            # This operation removes everything up to the "/" character,
            # effectively removing the port number from the string:
            readonly WSREP_SST_OPT_PATH="${remain#*/}"
        else
            readonly WSREP_SST_OPT_PATH=""
        fi
        WSREP_SST_OPT_ADDR_PORT=$(trim_right "$WSREP_SST_OPT_ADDR_PORT")
        # Remove the module name part from the string, which ends with "/":
        remain="${WSREP_SST_OPT_PATH#*/}"
        # This operation removes the tail after the very first occurrence
        # of the "/" character, inclusively:
        readonly WSREP_SST_OPT_MODULE=$(trim_right "${WSREP_SST_OPT_PATH%%/*}")
        # If there is one more "/" in the string, then everything before
        # it will be the LSN, otherwise the LSN is empty:
        if [ "$remain" != "$WSREP_SST_OPT_PATH" ]; then
            # Extract the part that matches the LSN by removing all
            # characters starting from the very first "/":
            readonly WSREP_SST_OPT_LSN=$(trim_right "${remain%%/*}")
            # Exctract everything after the first occurrence of
            # the "/" character in the string:
            source="$remain"
            remain="${remain#*/}"
            # If the remainder does not match the original string,
            # then there is something else (the version number in
            # our case):
            if [ "$remain" != "$source" ]; then
                # Let's extract the version number by removing the tail
                # after the very first occurence of the "/" character
                # (inclusively):
                readonly WSREP_SST_OPT_SST_VER=$(trim_right "${remain%%/*}")
            else
                readonly WSREP_SST_OPT_SST_VER=""
            fi
        else
            readonly WSREP_SST_OPT_LSN=""
            readonly WSREP_SST_OPT_SST_VER=""
        fi
        shift
        ;;
    '--bypass')
        readonly WSREP_SST_OPT_BYPASS=1
        ;;
    '--progress')
        readonly WSREP_SST_OPT_PROGRESS=$(( $2 ))
        shift
        ;;
    '--datadir')
        # Let's remove the trailing slash:
        readonly WSREP_SST_OPT_DATA=$(trim_dir "$2")
        shift
        ;;
    '--aria-log-dir-path')
        # Let's remove the trailing slash:
        readonly ARIA_LOG_DIR=$(trim_dir "$2")
        shift
        ;;
    '--innodb-data-home-dir')
        # Let's remove the trailing slash:
        readonly INNODB_DATA_HOME_DIR=$(trim_dir "$2")
        shift
        ;;
    '--innodb-log-group-home-dir')
        # Let's remove the trailing slash:
        readonly INNODB_LOG_GROUP_HOME=$(trim_dir "$2")
        shift
        ;;
    '--innodb-undo-directory')
        # Let's remove the trailing slash:
        readonly INNODB_UNDO_DIR=$(trim_dir "$2")
        shift
        ;;
    '--innodb-buffer-pool-filename')
        readonly INNODB_BUFFER_POOL=$(trim_string "$2")
        shift
        ;;
    '--defaults-file')
        file=$(trim_string "$2")
        readonly WSREP_SST_OPT_DEFAULT="$1=$file"
        readonly WSREP_SST_OPT_DEFAULTS="$1='$file'"
        shift
        ;;
    '--defaults-extra-file')
        file=$(trim_string "$2")
        readonly WSREP_SST_OPT_EXTRA_DEFAULT="$1=$file"
        readonly WSREP_SST_OPT_EXTRA_DEFAULTS="$1='$file'"
        shift
        ;;
    '--defaults-group-suffix')
        suffix=$(trim_string "$2")
        readonly WSREP_SST_OPT_SUFFIX_DEFAULT="$1=$suffix"
        readonly WSREP_SST_OPT_SUFFIX_VALUE="$suffix"
        shift
        ;;
    '--host')
        addr=$(trim_string "$2")
        case "$addr" in
        \[*)
            # IPv6
            # Remove the starting and ending square brackets, if present:
            addr="${addr#\[}"
            addr=$(trim_right "${addr%%\]*}")
            # Some utilities and subsequent code require an address
            # without square brackets:
            readonly WSREP_SST_OPT_HOST_UNESCAPED="$addr"
            # Square brackets are needed in most cases:
            readonly WSREP_SST_OPT_HOST="[$addr]"
            # Mark this address as IPv6:
            readonly WSREP_SST_OPT_HOST_IPv6=1
            ;;
        *)
            readonly WSREP_SST_OPT_HOST="$addr"
            readonly WSREP_SST_OPT_HOST_UNESCAPED="$addr"
            readonly WSREP_SST_OPT_HOST_IPv6=0
            ;;
        esac
        WSREP_SST_OPT_ADDR="$addr"
        shift
        ;;
    '--local-port')
        readonly WSREP_SST_OPT_LPORT=$(( $2 ))
        shift
        ;;
    '--parent')
        readonly WSREP_SST_OPT_PARENT=$(( $2 ))
        shift
        ;;
    '--password')
        WSREP_SST_OPT_PSWD="$2"
        shift
        ;;
    '--port')
        readonly WSREP_SST_OPT_PORT=$(( $2 ))
        shift
        ;;
    '--role')
        readonly WSREP_SST_OPT_ROLE=$(trim_string "$2")
        shift
        ;;
    '--socket')
        readonly WSREP_SST_OPT_SOCKET=$(trim_string "$2")
        shift
        ;;
    '--user')
        WSREP_SST_OPT_USER="$2"
        shift
        ;;
    '--gtid')
        readonly WSREP_SST_OPT_GTID=$(trim_string "$2")
        shift
        ;;
    '--binlog'|'--log-bin')
        readonly WSREP_SST_OPT_BINLOG=$(trim_string "$2")
        shift
        ;;
    '--binlog-index'|'--log-bin-index')
        WSREP_SST_OPT_BINLOG_INDEX=$(trim_string "$2")
        shift
        ;;
    '--log-basename')
        readonly WSREP_SST_OPT_LOG_BASENAME=$(trim_string "$2")
        shift
        ;;
    '--gtid-domain-id')
        readonly WSREP_SST_OPT_GTID_DOMAIN_ID=$(trim_string "$2")
        shift
        ;;
    '--mysqld-args')
        original_cmd=""
        shift
        cmd_tail=0
        while [ $# -gt 0 ]; do
           lname="${1#--}"
           # "--" is interpreted as the end of the list of options:
           if [ -z "$lname" ]; then
               shift
               if [ $# -gt 0 ]; then
                   # copy "--" to the output string:
                   original_cmd="$original_cmd --"
                   # All other arguments must be copied unchanged:
                   while [ $# -gt 0 ]; do
                       original_cmd="$original_cmd '$1'"
                       shift
                   done
               fi
               break
           fi
           # Make sure the argument does not start with "--", otherwise it
           # is a long option, which is processed after this "if":
           if [ "$lname" = "$1" ]; then
               # Check if the argument is the short option or the short
               # options list, starting with "-":
               options="${1#-}"
               if [ "$options" != "$1" -a -n "$options" ]; then
                   slist=""
                   while [ -n "$options" ]; do
                       # Let's separate the first character as the current
                       # option name:
                       if [ -n "$BASH_VERSION" ]; then
                           option="${options:0:1}"
                       else
                           # If it's not bash, then we need to use slow
                           # external utilities:
                           option=$(echo "$options" | cut -c1)
                       fi
                       # And the subsequent characters consider option value:
                       value=""
                       if [ ${#options} -gt 0 ]; then
                           value="${options#?}"
                       fi
                       # Check for options without argument:
                       if [ "$option" != '?' -a \
                            "$option" != 'a' -a \
                            "$option" != 's' -a \
                            "$option" != 'v' ]
                       then
                           # If the option value is absent, then check
                           # the following argument:
                           if [ -z "$value" -a $# -gt 1 ]; then
                               # if the next argument does not start with
                               # the "-" character, then next argument is
                               # the current option value:
                               if [ "${2#-}" = "$2" ]; then
                                   shift
                                   value="$1"
                               elif [ "$2" = '--' ]; then
                                   shift
                                   if [ $# -gt 1 ]; then
                                       cmd_tail=1
                                       shift
                                       value="$1"
                                   fi
                               fi
                           fi
                           if [ "$option" = 'h' ]; then
                               if [ -z "$WSREP_SST_OPT_DATA" ]; then
                                   MYSQLD_OPT_DATADIR=$(trim_dir "$value")
                               fi
                           elif [ "$option" != 'u' -a \
                                  "$option" != 'P' ]
                           then
                               if [ $cmd_tail -ne 0 ]; then
                                   option="$option --"
                               fi
                               if [ -z "$value" ]; then
                                   slist="$slist$option"
                               elif [ -z "$slist" ]; then
                                   slist="$option '$value'"
                               else
                                   slist="$slist -$option '$value'"
                               fi
                               break
                           fi
                           if [ $cmd_tail -ne 0 ]; then
                               if [ -n "$slist" ]; then
                                   slist="$slist --"
                               else
                                   slist='-'
                               fi
                           fi
                           break
                       else
                           slist="$slist$option"
                       fi
                       options="$value"
                   done
                   if [ -n "$slist" ]; then
                       original_cmd="$original_cmd -$slist"
                   fi
               elif [ -z "$options" ]; then
                   # We found an minus sign without any characters after it:
                   original_cmd="$original_cmd -"
               else
                   # We found a value that does not start with a minus -
                   # it is a positional argument or the value of previous
                   # option. Copy it to output string (as is):
                   original_cmd="$original_cmd '$1'"
               fi
               shift
               if [ $cmd_tail -ne 0 ]; then
                   # All other arguments must be copied unchanged:
                   while [ $# -gt 0 ]; do
                       original_cmd="$original_cmd '$1'"
                       shift
                   done
                   break
               fi
               continue
           fi
           # Now we are sure that we are working with an option
           # that has a "long" name, so remove all characters after
           # the first equal sign:
           option="${1%%=*}"
           # If the option name contains underscores, then replace
           # them to minuses:
           if [ "${option#*_}" != "$option" ]; then
               option=$(to_minuses "$option")
           fi
           # The "--loose-" prefix should not affect the recognition
           # of the option name:
           if [ "${option#--loose-}" != "$option" ]; then
               option="--${option#--loose-}"
           fi
           # Some options just need to be removed from the list:
           if [ "$option" != '--defaults-file' -a \
                "$option" != '--defaults-extra-file' -a \
                "$option" != '--defaults-group-suffix' -a \
                "$option" != '--user' -a \
                "$option" != '--port' -a \
                "$option" != '--socket' ]; then
               value="${1#*=}"
               if [ "$value" = "$1" ]; then
                   value=""
               fi
               # Let's fill in the variables containing important paths
               # that might not have been passed through explicit parameters
               # (+ removing the trailing slash in these paths). Many of these
               # options are processed internally within scripts or passed
               # explicitly to other programs, so we need to remove them
               # from mysqld's argument list:
               skip_mysqld_arg=0
               case "$option" in
                   '--aria-log-dir-path')
                       if [ -z "$ARIA_LOG_DIR" ]; then
                           MYSQLD_OPT_ARIA_LOG_DIR=$(trim_dir "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--innodb-data-home-dir')
                       if [ -z "$INNODB_DATA_HOME_DIR" ]; then
                           MYSQLD_OPT_INNODB_DATA_HOME_DIR=$(trim_dir "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--innodb-log-group-home-dir')
                       if [ -z "$INNODB_LOG_GROUP_HOME" ]; then
                           MYSQLD_OPT_INNODB_LOG_GROUP_HOME=$(trim_dir "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--innodb-undo-directory')
                       if [ -z "$INNODB_UNDO_DIR" ]; then
                           MYSQLD_OPT_INNODB_UNDO_DIR=$(trim_dir "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--innodb-buffer-pool-filename')
                       if [ -z "$INNODB_BUFFER_POOL" ]; then
                           MYSQLD_OPT_INNODB_BUFFER_POOL=$(trim_string "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--innodb-force-recovery')
                       if [ -n "$value" -a "$value" != "0" ]; then
                           INNODB_FORCE_RECOVERY=$(trim_string "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--log-bin')
                       if [ -z "$WSREP_SST_OPT_BINLOG" ]; then
                           MYSQLD_OPT_LOG_BIN=$(trim_string "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--log-bin-index')
                       if [ -z "$WSREP_SST_OPT_BINLOG_INDEX" ]; then
                           MYSQLD_OPT_LOG_BIN_INDEX=$(trim_string "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--log-basename')
                       if [ -z "$WSREP_SST_OPT_LOG_BASENAME" ]; then
                           MYSQLD_OPT_LOG_BASENAME=$(trim_string "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
                   '--datadir')
                       if [ -z "$WSREP_SST_OPT_DATA" ]; then
                           MYSQLD_OPT_DATADIR=$(trim_dir "$value")
                       fi
                       skip_mysqld_arg=1
                       ;;
               esac
               if [ $skip_mysqld_arg -eq 0 ]; then
                   original_cmd="$original_cmd '$1'"
               fi
           fi
           shift
        done
        WSREP_SST_OPT_MYSQLD="${original_cmd# *}"
        break
        ;;
    *) # Must be command usage
        # exit 1
        ;;
esac
shift
done

WSREP_TRANSFER_TYPE='SST'
[ $WSREP_SST_OPT_BYPASS -ne 0 ] && readonly WSREP_TRANSFER_TYPE='IST'
# Let's take the name of the current script as a base,
# removing the directory, extension and "wsrep_sst_" prefix:
WSREP_METHOD="${0##*/}"
WSREP_METHOD="${WSREP_METHOD%.*}"
readonly WSREP_METHOD="${WSREP_METHOD#wsrep_sst_}"
if [ -n "${WSREP_SST_OPT_ROLE+x}" ]; then
    if [ "$WSREP_SST_OPT_ROLE" != 'donor' -a \
         "$WSREP_SST_OPT_ROLE" != 'joiner' ]
    then
        wsrep_log_error "Unrecognized role: '$WSREP_SST_OPT_ROLE'"
        exit 22 # EINVAL
    fi
else
    readonly WSREP_SST_OPT_ROLE='donor'
fi

readonly WSREP_SST_OPT_PROGRESS

# The same argument can be present on the command line several
# times, in this case we must take its last value:
if [ -n "${MYSQLD_OPT_ARIA_LOG_DIR:-}" -a \
     -z "$ARIA_LOG_DIR" ]; then
    readonly ARIA_LOG_DIR="$MYSQLD_OPT_ARIA_LOG_DIR"
fi
if [ -n "${MYSQLD_OPT_INNODB_DATA_HOME_DIR:-}" -a \
     -z "$INNODB_DATA_HOME_DIR" ]; then
    readonly INNODB_DATA_HOME_DIR="$MYSQLD_OPT_INNODB_DATA_HOME_DIR"
fi
if [ -n "${MYSQLD_OPT_INNODB_LOG_GROUP_HOME:-}" -a \
     -z "$INNODB_LOG_GROUP_HOME" ]; then
    readonly INNODB_LOG_GROUP_HOME="$MYSQLD_OPT_INNODB_LOG_GROUP_HOME"
fi
if [ -n "${MYSQLD_OPT_INNODB_UNDO_DIR:-}" -a \
     -z "$INNODB_UNDO_DIR" ]; then
    readonly INNODB_UNDO_DIR="$MYSQLD_OPT_INNODB_UNDO_DIR"
fi
if [ -n "${MYSQLD_OPT_INNODB_BUFFER_POOL:-}" -a \
     -z "$INNODB_BUFFER_POOL" ]; then
    readonly INNODB_BUFFER_POOL="$MYSQLD_OPT_INNODB_BUFFER_POOL"
fi
if [ -n "${MYSQLD_OPT_LOG_BIN:-}" -a \
     -z "$WSREP_SST_OPT_BINLOG" ]; then
    readonly WSREP_SST_OPT_BINLOG="$MYSQLD_OPT_LOG_BIN"
fi
if [ -n "${MYSQLD_OPT_LOG_BIN_INDEX:-}" -a \
     -z "$WSREP_SST_OPT_BINLOG_INDEX" ]; then
    WSREP_SST_OPT_BINLOG_INDEX="$MYSQLD_OPT_LOG_BIN_INDEX"
fi
if [ -n "${MYSQLD_OPT_DATADIR:-}" -a \
     -z "$WSREP_SST_OPT_DATA" ]; then
    readonly WSREP_SST_OPT_DATA="$MYSQLD_OPT_DATADIR"
fi
if [ -n "${MYSQLD_OPT_LOG_BASENAME:-}" -a \
     -z "$WSREP_SST_OPT_LOG_BASENAME" ]; then
    readonly WSREP_SST_OPT_LOG_BASENAME="$MYSQLD_OPT_LOG_BASENAME"
fi

# If the --log-bin option is present without a value, then
# set WSREP_SST_OPT_BINLOG value using other arguments:
if [ -z "$WSREP_SST_OPT_BINLOG" -a -n "${MYSQLD_OPT_LOG_BIN+x}" ]; then
    if [ -n "$WSREP_SST_OPT_LOG_BASENAME" ]; then
        # If the WSREP_SST_OPT_BINLOG variable is not set, but
        # --log-basename is present among the arguments to mysqld,
        # then set WSREP_SST_OPT_BINLOG equal to the base name
        # with the "-bin" suffix:
        readonly WSREP_SST_OPT_BINLOG="$WSREP_SST_OPT_LOG_BASENAME-bin"
    else
        # Take the default name:
        readonly WSREP_SST_OPT_BINLOG='mysql-bin'
    fi
fi

# Reconstructing the command line arguments that control the innodb
# and binlog options:
if [ -n "$WSREP_SST_OPT_LOG_BASENAME" ]; then
    if [ -n "$WSREP_SST_OPT_MYSQLD" ]; then
        WSREP_SST_OPT_MYSQLD="--log-basename='$WSREP_SST_OPT_LOG_BASENAME' $WSREP_SST_OPT_MYSQLD"
    else
        WSREP_SST_OPT_MYSQLD="--log-basename='$WSREP_SST_OPT_LOG_BASENAME'"
    fi
fi
if [ -n "$ARIA_LOG_DIR" ]; then
    INNOEXTRA="$INNOEXTRA --aria-log-dir-path='$ARIA_LOG_DIR'"
fi
if [ -n "$INNODB_DATA_HOME_DIR" ]; then
    INNOEXTRA="$INNOEXTRA --innodb-data-home-dir='$INNODB_DATA_HOME_DIR'"
fi
if [ -n "$INNODB_LOG_GROUP_HOME" ]; then
    INNOEXTRA="$INNOEXTRA --innodb-log-group-home-dir='$INNODB_LOG_GROUP_HOME'"
fi
if [ -n "$INNODB_UNDO_DIR" ]; then
    INNOEXTRA="$INNOEXTRA --innodb-undo-directory='$INNODB_UNDO_DIR'"
fi
if [ -n "$INNODB_BUFFER_POOL" ]; then
    INNOEXTRA="$INNOEXTRA --innodb-buffer-pool-filename='$INNODB_BUFFER_POOL'"
fi
if [ -n "$WSREP_SST_OPT_BINLOG" ]; then
    INNOEXTRA="$INNOEXTRA --log-bin='$WSREP_SST_OPT_BINLOG'"
    if [ -n "$WSREP_SST_OPT_BINLOG_INDEX" ]; then
        if [ -n "$WSREP_SST_OPT_MYSQLD" ]; then
            WSREP_SST_OPT_MYSQLD="--log-bin-index='$WSREP_SST_OPT_BINLOG_INDEX' $WSREP_SST_OPT_MYSQLD"
        else
            WSREP_SST_OPT_MYSQLD="--log-bin-index='$WSREP_SST_OPT_BINLOG_INDEX'"
        fi
    fi
fi

readonly INNODB_FORCE_RECOVERY
readonly WSREP_SST_OPT_MYSQLD

get_binlog()
{
    # if no command line argument and WSREP_SST_OPT_BINLOG is not set,
    # try to get it from my.cnf:
    if [ -z "$WSREP_SST_OPT_BINLOG" ]; then
        WSREP_SST_OPT_BINLOG=$(parse_cnf '--mysqld' 'log-bin')
    fi
    # if no command line argument and WSREP_SST_OPT_BINLOG_INDEX is not set,
    # try to get it from my.cnf:
    if [ -z "$WSREP_SST_OPT_BINLOG_INDEX" ]; then
        WSREP_SST_OPT_BINLOG_INDEX=$(parse_cnf '--mysqld' 'log-bin-index')
    fi
    # if no command line argument and WSREP_SST_OPT_LOG_BASENAME is not set,
    # then try to get it from my.cnf:
    if [ -z "$WSREP_SST_OPT_LOG_BASENAME" ]; then
        WSREP_SST_OPT_LOG_BASENAME=$(parse_cnf '--mysqld' 'log-basename')
    fi
    if [ -z "$WSREP_SST_OPT_BINLOG" ]; then
        # If the log-bin option is specified without a parameter,
        # then we need to build the name of the index file according
        # to the rules described in the server documentation:
        if [ $(in_config '--mysqld' 'log-bin') -ne 0 ]; then
            if [ -n "$WSREP_SST_OPT_LOG_BASENAME" ]; then
                # If the WSREP_SST_OPT_BINLOG variable is not set, but
                # --log-basename is present among the arguments of mysqld,
                # then set WSREP_SST_OPT_BINLOG equal to the base name
                # with the "-bin" suffix:
                readonly WSREP_SST_OPT_BINLOG="$WSREP_SST_OPT_LOG_BASENAME-bin"
            else
                # Take the default name:
                readonly WSREP_SST_OPT_BINLOG='mysql-bin'
            fi
        fi
    fi
    if [ -n "$WSREP_SST_OPT_BINLOG" ]; then
        # If the name of the index file is not specified, then we will build
        # it according to the specifications for the server:
        if [ -z "$WSREP_SST_OPT_BINLOG_INDEX" ]; then
            if [ -n "$WSREP_SST_OPT_LOG_BASENAME" ]; then
                # If the WSREP_SST_OPT_BINLOG_INDEX variable is not set, but
                # --log-basename is present among the arguments of mysqld,
                # then set WSREP_SST_OPT_BINLOG_INDEX equal to the base name
                # with the "-bin" suffix:
                readonly WSREP_SST_OPT_BINLOG_INDEX="$WSREP_SST_OPT_LOG_BASENAME-bin.index"
            else
                # Use the default name (note that base of this name
                # is already defined above):
                readonly WSREP_SST_OPT_BINLOG_INDEX="$WSREP_SST_OPT_BINLOG.index"
            fi
        else
            # Remove all directories from the index file path:
            local filename="${WSREP_SST_OPT_BINLOG_INDEX##*/}"
            # Check if the index file name contains the extension:
            if [ "${filename%.*}" = "$filename" ]; then
                # Let's add the default extension (".index"):
                readonly WSREP_SST_OPT_BINLOG_INDEX="$WSREP_SST_OPT_BINLOG_INDEX.index"
            else
                readonly WSREP_SST_OPT_BINLOG_INDEX
            fi
        fi
    fi
}

# Check the presence of the port value and, if necessary, transfer
# the port number from the address to the WSREP_SST_OPT_PORT variable
# or vice versa, and also, if necessary, substitute the missing port
# value into the address value:
if [ -n "$WSREP_SST_OPT_ADDR_PORT" ]; then
    if [ -n "$WSREP_SST_OPT_PORT" ]; then
        if [ "$WSREP_SST_OPT_PORT" != "$WSREP_SST_OPT_ADDR_PORT" ]; then
            echo "WSREP_SST: [ERROR] port in --port=$WSREP_SST_OPT_PORT" \
                 "differs from port in --address=$WSREP_SST_OPT_ADDR" >&2
            exit 2
        fi
    else
        # If the address contains a port number, assign it to
        # the corresponding variable:
        readonly WSREP_SST_OPT_PORT="$WSREP_SST_OPT_ADDR_PORT"
    fi
else
    # If the port is missing, take the default port:
    if [ -z "$WSREP_SST_OPT_PORT" ]; then
        readonly WSREP_SST_OPT_PORT=4444
    fi
    WSREP_SST_OPT_ADDR_PORT="$WSREP_SST_OPT_PORT"
fi

# Let's construct a new value for the address with the port:
sst_path="${WSREP_SST_OPT_PATH:+/}$WSREP_SST_OPT_PATH"
WSREP_SST_OPT_ADDR="$WSREP_SST_OPT_HOST:$WSREP_SST_OPT_PORT$sst_path"

readonly WSREP_SST_OPT_ADDR
readonly WSREP_SST_OPT_ADDR_PORT

commandex()
{
    if [ -n "$BASH_VERSION" ]; then
        command -v "$1" || :
    elif [ -x "$1" ]; then
        echo "$1"
    else
        which "$1" || :
    fi
}

# try to use my_print_defaults, mysql and mysqldump that come
# with the sources (for MTR suite):
script_binary=$(dirname "$0")
SCRIPTS_DIR=$(cd "$script_binary"; pwd)
EXTRA_DIR="$SCRIPTS_DIR/../extra"
CLIENT_DIR="$SCRIPTS_DIR/../client"

if [ -x "$CLIENT_DIR/mysql" ]; then
    MYSQL_CLIENT="$CLIENT_DIR/mysql"
else
    MYSQL_CLIENT=$(commandex 'mysql')
fi

if [ -x "$CLIENT_DIR/mysqldump" ]; then
    MYSQLDUMP="$CLIENT_DIR/mysqldump"
else
    MYSQLDUMP=$(commandex 'mysqldump')
fi

wsrep_log()
{
    # echo everything to stderr so that it gets into common error log
    # deliberately made to look different from the rest of the log
    local readonly tst=$(date "+%Y%m%d %H:%M:%S.%N" | cut -b -21)
    echo "WSREP_SST: $* ($tst)" >&2
}

wsrep_log_error()
{
    wsrep_log "[ERROR] $*"
}

wsrep_log_warning()
{
    wsrep_log "[WARNING] $*"
}

wsrep_log_info()
{
    wsrep_log "[INFO] $*"
}

if [ -x "$SCRIPTS_DIR/my_print_defaults" ]; then
    MY_PRINT_DEFAULTS="$SCRIPTS_DIR/my_print_defaults"
elif [ -x "$EXTRA_DIR/my_print_defaults" ]; then
    MY_PRINT_DEFAULTS="$EXTRA_DIR/my_print_defaults"
else
    MY_PRINT_DEFAULTS=$(commandex 'my_print_defaults')
    if [ -z "$MY_PRINT_DEFAULTS" ]; then
        wsrep_log_error "my_print_defaults not found in path"
        exit 2
    fi
fi

readonly MY_PRINT_DEFAULTS

wsrep_defaults="$WSREP_SST_OPT_DEFAULTS"
wsrep_defaults="$wsrep_defaults${WSREP_SST_OPT_EXTRA_DEFAULTS:+ }$WSREP_SST_OPT_EXTRA_DEFAULTS"
wsrep_defaults="$wsrep_defaults${WSREP_SST_OPT_SUFFIX_DEFAULT:+ }$WSREP_SST_OPT_SUFFIX_DEFAULT"

readonly WSREP_SST_OPT_CONF="${wsrep_defaults:+ }$wsrep_defaults"

wsrep_defaults="$WSREP_SST_OPT_DEFAULT"
wsrep_defaults="$wsrep_defaults${WSREP_SST_OPT_EXTRA_DEFAULT:+ }$WSREP_SST_OPT_EXTRA_DEFAULT"
wsrep_defaults="$wsrep_defaults${WSREP_SST_OPT_SUFFIX_DEFAULT:+ }$WSREP_SST_OPT_SUFFIX_DEFAULT"

readonly WSREP_SST_OPT_CONF_UNQUOTED="${wsrep_defaults:+ }$wsrep_defaults"

#
# User can specify mariabackup specific settings that will be used during sst
# process like encryption, etc. Parse such configuration option.
#
# 1st parameter: group (config file section like sst) or
#                my_print_defaults argument (like --mysqld)
# 2nd parameter: var : name of the variable in the section, e.g. server-id
# 3rd parameter: default value for the parameter
#
parse_cnf()
{
    local groups="$1"
    local var="$2"
    local reval=""

# normalize the variable names specified in the .cnf file
    # (user can use '_' or '-', for example, log-bin or log_bin),
    # then search for the last instance of the desired variable
    # and finally get the value of that variable (if the variable
    # was specified several times - we use only its last instance):

local pattern='BEGIN {OFS=FS="="} {sub(/^--loose/,"-",$0); gsub(/_/,"-",$1); if ($1=="--'"$var"'") lastval=substr($0,length($1)+2)} END {print lastval}'

while [ -n "$groups" ]; do
        # Remove the largest suffix starting with the '|' character:
        local group="${groups%%\|*}"
        # Remove the remainder (the group name) from the rest
        # of the groups list (as if it were a prefix):
        if [ "$group" != "$groups" ]; then
            groups="${groups#*\|}"
        else
            groups=""
        fi
        # If the group name is the same as the "mysqld" without "--" prefix,
        # then try to use it together with the group suffix:
        if [ "$group" = 'mysqld' -a -n "$WSREP_SST_OPT_SUFFIX_VALUE" ]; then
            reval=$("$MY_PRINT_DEFAULTS" \
                    ${WSREP_SST_OPT_DEFAULT:+"$WSREP_SST_OPT_DEFAULT"} \
                    ${WSREP_SST_OPT_EXTRA_DEFAULT:+"$WSREP_SST_OPT_EXTRA_DEFAULT"} \
                    ${WSREP_SST_OPT_SUFFIX_DEFAULT:+"$WSREP_SST_OPT_SUFFIX_DEFAULT"} \
                    "mysqld$WSREP_SST_OPT_SUFFIX_VALUE" | awk "$pattern")
            if [ -n "$reval" ]; then
                break
            fi
        fi
        # Let's try to use the group name as it is:
        reval=$("$MY_PRINT_DEFAULTS" \
                ${WSREP_SST_OPT_DEFAULT:+"$WSREP_SST_OPT_DEFAULT"} \
                ${WSREP_SST_OPT_EXTRA_DEFAULT:+"$WSREP_SST_OPT_EXTRA_DEFAULT"} \
                ${WSREP_SST_OPT_SUFFIX_DEFAULT:+"$WSREP_SST_OPT_SUFFIX_DEFAULT"} \
                "$group" | awk "$pattern")
        if [ -n "$reval" ]; then
            break
        fi
    done

# Use default if we haven't found a value:
    [ -z "$reval" ] && reval="${3:-}"

# Truncate spaces:
    [ -n "$reval" ] && reval=$(trim_string "$reval")

if [ -n "$BASH_VERSION" ]; then
        printf '%s' "$reval"
    else
        echo "$reval"
    fi
}

#
# This function simply checks for the presence of the parameter
# in the config file, but does not return its value. It returns "1"
# (true) even if the parameter is present in the configuration file
# without a value:
#
in_config()
{
    local groups="$1"
    local var="$2"
    local found=0

# normalize the variable names specified in the .cnf file
    # (user can use '_' or '-', for example, log-bin or log_bin),
    # then search for the last instance(s) of the desired variable:

local pattern='BEGIN {OFS=FS="="; found=0} {sub(/^--loose/,"-",$0); gsub(/_/,"-",$1); if ($1=="--'"$var"'") found=1} END {print found}'

while [ -n "$groups" ]; do
        # Remove the largest suffix starting with the '|' character:
        local group="${groups%%\|*}"
        # Remove the remainder (the group name) from the rest
        # of the groups list (as if it were a prefix):
        if [ "$group" != "$groups" ]; then
            groups="${groups#*\|}"
        else
            groups=""
        fi
        # If the group name is the same as the "mysqld" without "--" prefix,
        # then try to use it together with the group suffix:
        if [ "$group" = 'mysqld' -a -n "$WSREP_SST_OPT_SUFFIX_VALUE" ]; then
            found=$("$MY_PRINT_DEFAULTS" \
                    ${WSREP_SST_OPT_DEFAULT:+"$WSREP_SST_OPT_DEFAULT"} \
                    ${WSREP_SST_OPT_EXTRA_DEFAULT:+"$WSREP_SST_OPT_EXTRA_DEFAULT"} \
                    ${WSREP_SST_OPT_SUFFIX_DEFAULT:+"$WSREP_SST_OPT_SUFFIX_DEFAULT"} \
                    "mysqld$WSREP_SST_OPT_SUFFIX_VALUE" | awk "$pattern")
            if [ $found -ne 0 ]; then
                break
            fi
        fi
        # Let's try to use the group name as it is:
        found=$($MY_PRINT_DEFAULTS \
                ${WSREP_SST_OPT_DEFAULT:+"$WSREP_SST_OPT_DEFAULT"} \
                ${WSREP_SST_OPT_EXTRA_DEFAULT:+"$WSREP_SST_OPT_EXTRA_DEFAULT"} \
                ${WSREP_SST_OPT_SUFFIX_DEFAULT:+"$WSREP_SST_OPT_SUFFIX_DEFAULT"} \
                "$group" | awk "$pattern")
        if [ $found -ne 0 ]; then
            break
        fi
    done
    if [ -n "$BASH_VERSION" ]; then
        printf '%s' $found
    else
        echo $found
    fi
}

wsrep_auth_not_set()
{
    [ -z "$WSREP_SST_OPT_AUTH" ]
}

# Get rid of incorrect values resulting from substitution
# in programs external to the script:
if [ "$WSREP_SST_OPT_USER" = '(null)' ]; then
    WSREP_SST_OPT_USER=""
fi
if [ "$WSREP_SST_OPT_PSWD" = '(null)' ]; then
    WSREP_SST_OPT_PSWD=""
fi
if [ "$WSREP_SST_OPT_AUTH" = '(null)' ]; then
    WSREP_SST_OPT_AUTH=""
fi

# Let's read the value of the authentication string from the
# configuration file so that it does not go to the command line
# and does not appear in the ps output:
if wsrep_auth_not_set; then
    WSREP_SST_OPT_AUTH=$(parse_cnf 'sst' 'wsrep-sst-auth')
fi

# Splitting WSREP_SST_OPT_AUTH as "user:password" pair:
if ! wsrep_auth_not_set; then
    # Extract username as shortest prefix up to first ':' character:
    WSREP_SST_OPT_AUTH_USER="${WSREP_SST_OPT_AUTH%%:*}"
    if [ -z "$WSREP_SST_OPT_USER" ]; then
        # if the username is not in the command line arguments,
        # set the username and password using WSREP_SST_OPT_AUTH
        # from the environment:
        WSREP_SST_OPT_USER="$WSREP_SST_OPT_AUTH_USER"
        WSREP_SST_OPT_PSWD="${WSREP_SST_OPT_AUTH#*:}"
    elif [ "$WSREP_SST_OPT_USER" = "$WSREP_SST_OPT_AUTH_USER" ]; then
        # If the username in the command line arguments and in
        # the environment variable are the same, set the password
        # if it was not specified in the command line:
        if [ -z "$WSREP_SST_OPT_PSWD" ]; then
            WSREP_SST_OPT_PSWD="${WSREP_SST_OPT_AUTH#*:}"
        fi
    else
        # The username is passed through the command line and does
        # not match the username in the environment variable - ignore
        # the environment and rebuild the authentication parameters:
        WSREP_SST_OPT_AUTH="$WSREP_SST_OPT_USER:$WSREP_SST_OPT_PSWD"
    fi
fi

readonly WSREP_SST_OPT_USER
readonly WSREP_SST_OPT_PSWD
readonly WSREP_SST_OPT_AUTH

if [ -n "$WSREP_SST_OPT_REMOTE_AUTH" ]; then
    # Split auth string at the last ':'
    readonly WSREP_SST_OPT_REMOTE_USER="${WSREP_SST_OPT_REMOTE_AUTH%%:*}"
    readonly WSREP_SST_OPT_REMOTE_PSWD="${WSREP_SST_OPT_REMOTE_AUTH#*:}"
else
    readonly WSREP_SST_OPT_REMOTE_USER=
    readonly WSREP_SST_OPT_REMOTE_PSWD=
fi

readonly WSREP_SST_OPT_REMOTE_AUTH

if [ -n "$WSREP_SST_OPT_DATA" ]; then
    SST_PROGRESS_FILE="$WSREP_SST_OPT_DATA/sst_in_progress"
else
    SST_PROGRESS_FILE=""
fi

wsrep_cleanup_progress_file()
{
    if [ -n "$SST_PROGRESS_FILE" -a -f "$SST_PROGRESS_FILE" ]; then
        rm -f "$SST_PROGRESS_FILE" 2>/dev/null || :
    fi
}

wsrep_check_program()
{
    local prog="$1"
    local cmd=$(commandex "$prog")
    if [ -z "$cmd" ]; then
        echo "'$prog' not found in PATH"
        return 2 # no such file or directory
    fi
}

wsrep_check_programs()
{
    local ret=0
    while [ $# -gt 0 ]; do
        wsrep_check_program "$1" || ret=$?
        shift
    done
    return $ret
}

wsrep_check_datadir()
{
    if [ -z "$WSREP_SST_OPT_DATA" ]; then
        wsrep_log_error \
            "The '--datadir' parameter must be passed to the SST script"
        exit 2
    fi
}

get_openssl()
{
    # If the OPENSSL_BINARY variable is already defined, just return:
    if [ -n "${OPENSSL_BINARY+x}" ]; then
        return
    fi
    # Let's look for openssl:
    OPENSSL_BINARY=$(commandex 'openssl')
    if [ -z "$OPENSSL_BINARY" ]; then
        OPENSSL_BINARY='/usr/bin/openssl'
        if [ ! -x "$OPENSSL_BINARY" ]; then
            OPENSSL_BINARY=""
        fi
    fi
    readonly OPENSSL_BINARY
}

#
# Generate a string equivalent to 16 random bytes
#
wsrep_gen_secret()
{
    get_openssl
    if [ -n "$OPENSSL_BINARY" ]; then
        "$OPENSSL_BINARY" rand -hex 16
    elif [ -n "$BASH_VERSION" ]; then
        printf '%04x%04x%04x%04x%04x%04x%04x%04x' \
               $RANDOM $RANDOM $RANDOM $RANDOM \
               $RANDOM $RANDOM $RANDOM $RANDOM
    elif [ -n "$(commandex cksum)" -a \
           -n "$(commandex printf)" ]
    then
        printf '%08x%08x%08x%08x' \
            $(head -8 /dev/urandom | cksum | cut -d ' ' -f1) \
            $(head -8 /dev/urandom | cksum | cut -d ' ' -f1) \
            $(head -8 /dev/urandom | cksum | cut -d ' ' -f1) \
            $(head -8 /dev/urandom | cksum | cut -d ' ' -f1)
    else
        wsrep_log_error "Unable to generate 16-byte secret"
        exit 22
    fi
}

#
# Checking if the address passed to us is local.
# If the second parameter is nonzero, then this function
# does not check for matches with local domain names:
#
is_local_ip()
{
    # Rapid recognition of the most common cases:
    [ "$1" = '127.0.0.1' -o \
      "$1" = '127.0.0.2' -o \
      "$1" = 'localhost' -o \
      "$1" = '::1' ] && return 0
    # If the address starts with "127." this is probably a local
    # address, but we need to clarify what follows this prefix:
    if [ "${1#127.}" != "$1" ]; then
        # All 127.0.0.0/8 addresses are local:
        if echo "$1" | grep -q -E '^127\.[0-9]+\.[0-9]+\.[0-9]+$'; then
            return 0
        fi
    fi
    # If the second parameter is nonzero, then we will skip
    # the domain name check:
    if [ "${2:-0}" -eq 0 ]; then
       # We consider all the names of a given host to be local addresses:
       [ "$1" = "$(hostname -s)" -o \
         "$1" = "$(hostname -f)" -o \
         "$1" = "$(hostname -d)" ] && return 0
    fi
    # If the address contains anything other than digits
    # and separators, it is not a local address:
    [ "${1#*[!0-9.]}" != "$1" ] && \
    [ "${1#*[!0-9A-Fa-f:\[\]]}" != "$1" ] && return 1
    # Now let's check if the given address is assigned to
    # one of the network cards:
    local ip_util=$(commandex 'ip')
    if [ -n "$ip_util" ]; then
        # ip address show ouput format is " inet[6] <address>/<mask>":
        "$ip_util" address show \
            | grep -o -E '^[[:space:]]*inet.?[[:space:]]+[^[:space:]]+/' \
            | grep -qw -F -- "$1/" && return 0
    else
        local ifconfig_util=$(commandex 'ifconfig')
        if [ -n "$ifconfig_util" ]; then
            # ifconfig output format is " inet[6] <address> ...":
            "$ifconfig_util" \
                | grep -o -E '^[[:space:]]*inet.?[[:space:]]+[^[:space:]]+' \
                | grep -qw -F -- "$1" && return 0
        fi
    fi
    return 1
}

check_sockets_utils()
{
    lsof_available=0
    sockstat_available=0
    ss_available=0

[ -n "$(commandex lsof)" ] && lsof_available=1
    [ -n "$(commandex sockstat)" ] && sockstat_available=1
    [ -n "$(commandex ss)" ] && ss_available=1

if [ $lsof_available -eq 0 -a \
         $sockstat_available -eq 0 -a \
         $ss_available -eq 0 ]
    then
        wsrep_log_error "Neither lsof, nor sockstat or ss tool was found in" \
                        "the PATH. Make sure you have it installed."
        exit 2 # ENOENT
    fi
}

#
# Check if the port is in the "listen" state.
# The first parameter is the PID of the process that should
# listen on the port - if it is not known, you can specify
# an empty string or zero.
# The second parameter is the port number.
# The third parameter is a list of the names of utilities
# (via "|") that can listen on this port during the state
# transfer.
#
check_port()
{
    local pid="${1:-0}"
    local port="$2"
    local utils="$3"

[ $pid -le 0 ] && pid='[0-9]+'

local rc=1

if [ $lsof_available -ne 0 ]; then
        lsof -Pnl -i ":$port" 2>/dev/null | \
        grep -q -E "^($utils)[^[:space:]]*[[:space:]]+$pid[[:space:]].*\$LISTEN\$" && rc=0
    elif [ $sockstat_available -ne 0 ]; then
        local opts='-p'
        if [ "$OS" = 'FreeBSD' ]; then
            # sockstat on FreeBSD requires the "-s" option
            # to display the connection state:
            opts='-sp'
        fi
        sockstat "$opts" "$port" 2>/dev/null | \
        grep -q -E "[[:space:]]+($utils)[^[:space:]]*[[:space:]]+$pid[[:space:]].*[[:space:]]LISTEN" && rc=0
    elif [ $ss_available -ne 0 ]; then
        ss -nlpH "( sport = :$port )" 2>/dev/null | \
        grep -q -E "users:\$.*\\(\"($utils)[^[:space:]]*\"[^)]*,pid=$pid(,[^)]*)?\$" && rc=0
    else
        wsrep_log_error "Unknown sockets utility"
        exit 2 # ENOENT
    fi

return $rc
}

#
# If the ssl_dhparams variable is already set, uses that as a source
# of dh parameters for OpenSSL. Otherwise, looks for dhparams.pem in
# the datadir, and creates it there if it can't find the file.
#
check_for_dhparams()
{
    ssl_dhparams="$DATA/dhparams.pem"
    get_openssl
    if [ -n "$OPENSSL_BINARY" ]; then
        wsrep_log_info \
            "Could not find dhparams file, creating $ssl_dhparams"
        local bug=0
        local errmsg
        errmsg=$("$OPENSSL_BINARY" \
                 dhparam -out "$ssl_dhparams" -dsaparam 2048 2>&1) || bug=1
        if [ $bug -ne 0 ]; then
            wsrep_log_info "run: \"$OPENSSL_BINARY\" dhparam"\
                           "-out \"$ssl_dhparams\" -dsaparam 2048"
            wsrep_log_info "output: $errmsg"
            wsrep_log_error "******** ERROR *****************************************"
            wsrep_log_error "* Could not create the dhparams.pem file with OpenSSL. *"
            wsrep_log_error "********************************************************"
            ssl_dhparams=""
        fi
    else
        # Rollback: if openssl is not installed, then use
        # the default parameters:
        ssl_dhparams=""
    fi
}

#
# Verifies that the CA file verifies the certificate.
# Doing this here lets us generate better error messages.
#
# 1st param: path to the CA file.
# 2nd param: path to the certificate.
#
verify_ca_matches_cert()
{
    local cert="$1"
    local ca="$2"
    local cap="$3"

local readable=1; [ ! -r "$cert" ] && readable=0
         [ -n "$ca"  -a ! -r "$ca"   ] && readable=0
         [ -n "$cap" -a ! -r "$cap"  ] && readable=0

if [ $readable -eq 0 ]; then
        wsrep_log_error \
            "Both PEM file and CA file (or path) must be readable"
        exit 22
    fi

# If the openssl utility is not installed, then
    # we will not do this certificate check:
    get_openssl
    if [ -z "$OPENSSL_BINARY" ]; then
        wsrep_log_info "openssl utility not found"
        return
    fi

local not_match=0
    local errmsg
    errmsg=$("$OPENSSL_BINARY" verify -verbose \
                 ${ca:+ -CAfile} ${ca:+ "$ca"} \
                 ${cap:+ -CApath} ${cap:+ "$cap"} \
                 "$cert" 2>&1) || not_match=1

if [ $not_match -eq 1 ]; then
        wsrep_log_info "run: \"$OPENSSL_BINARY\" verify -verbose${ca:+ -CAfile \"$ca\"}${cap:+ -CApath \"$cap\"} \"$cert\""
        wsrep_log_info "output: $errmsg"
        wsrep_log_error "******** FATAL ERROR ********************************************"
        wsrep_log_error "* The certifcate and CA (certificate authority) do not match.   *"
        wsrep_log_error "* It does not appear that the certificate was issued by the CA. *"
        wsrep_log_error "* Please check your certificate and CA files.                   *"
        wsrep_log_error "*****************************************************************"
        exit 22
    fi
}

#
# Verifies that the certificate matches the private key.
# Doing this will save us having to wait for a timeout that would
# otherwise occur.
#
# 1st param: path to the certificate.
# 2nd param: path to the private key.
#
verify_cert_matches_key()
{
    local cert="$1"
    local key="$2"

if [ ! -r "$key" -o ! -r "$cert" ]; then
        wsrep_log_error "Both the certificate file and the key file" \
                        "must be readable"
        exit 22
    fi

# Generate the public key from the cert and the key.
    # They should match (otherwise we can't create an SSL connection).
    local pk1=$("$OPENSSL_BINARY" x509 -in "$cert" -pubkey -noout 2>/dev/null || :)
    local pk2=$("$OPENSSL_BINARY" pkey -in "$key" -pubout 2>/dev/null || :)
    if [ "$pk1" != "$pk2" ]; then
        wsrep_log_error "******************* FATAL ERROR *****************"
        wsrep_log_error "* The certificate and private key do not match. *"
        wsrep_log_error "* Please check your certificate and key files.  *"
        wsrep_log_error "*************************************************"
        exit 22
    fi
}

#
# Compares two version strings.
# The first parameter is the version to be checked;
# The second parameter is the minimum version required;
# Returns 1 (failure) if $1 >= $2, 0 (success) otherwise.
#
check_for_version()
{
    local y1="${1#*.}"
    [ "$y1" = "$1" ] && y1=""
    local z1="${y1#*.}"
    [ "$z1" = "$y1" ] && z1=""
    local w1="${z1#*.}"
    [ "$w1" = "$z1" ] && w1=""
    local x1="${1%%.*}"
    y1="${y1%%.*}"
    z1="${z1%%.*}"
    w1="${w1%%.*}"
    [ -z "$y1" ] && y1=0
    [ -z "$z1" ] && z1=0
    [ -z "$w1" ] && w1=0
    local y2="${2#*.}"
    [ "$y2" = "$2" ] && y2=""
    local z2="${y2#*.}"
    [ "$z2" = "$y2" ] && z2=""
    local w2="${z2#*.}"
    [ "$w2" = "$z2" ] && w2=""
    local x2="${2%%.*}"
    y2="${y2%%.*}"
    z2="${z2%%.*}"
    w2="${w2%%.*}"
    [ -z "$y2" ] && y2=0
    [ -z "$z2" ] && z2=0
    [ -z "$w2" ] && w2=0
    [ $x1 -lt $x2 ] && return 1
    [ $x1 -gt $x2 ] && return 0
    [ $y1 -lt $y2 ] && return 1
    [ $y1 -gt $y2 ] && return 0
    [ $z1 -lt $z2 ] && return 1
    [ $z1 -gt $z2 ] && return 0
    [ $w1 -lt $w2 ] && return 1
    return 0
}

#
# Check whether process is still running.
# The first parameter contains the name of the PID file.
# The second parameter is the flag of the need to delete
# the PID file.
# If the second parameter is not zero and not empty,
# then if the process terminates, the corresponding
# PID file will be deleted.
# This function also sets the CHECK_PID variable to zero
# if the process has already exited, or writes the PID
# of the process there if it is still running.
#
check_pid()
{
    local pid_file="$1"
    if [ -r "$pid_file" ]; then
        local pid=$(cat "$pid_file" 2>/dev/null || :)
        if [ -n "$pid" ]; then
            if [ $pid -gt 0 ]; then
                if ps -p $pid >/dev/null 2>&1; then
                    CHECK_PID=$pid
                    return 0
                fi
            fi
        fi
        local remove=${2:-0}
        if [ $remove -ne 0 ]; then
            rm -f "$pid_file" || :
        fi
    fi
    local config="${3:-}"
    if [ -n "$config" -a -f "$config" ]; then
        rm -f "$config" || :
    fi
    CHECK_PID=0
    return 1
}

#
# Checking that the process with the specified PID is still
# running and killing it in this case by sending SIGTERM
# (using the "kill" operation).
# The first parameter contains PID of the process.
# The second and third parameters (both optional) are the names
# of the PID and the configuration files, which should be removed
# after the process ends.
# If the first parameter (PID of the process) is zero, then
# the function immediately deletes the PID and the configuration
# files (if specified), without any additional checks.
#
cleanup_pid()
{
    local pid=$1
    local pid_file="${2:-}"
    local config="${3:-}"

if [ $pid -gt 0 ]; then
        if ps -p $pid >/dev/null 2>&1; then
            if kill $pid >/dev/null 2>&1; then
                sleep 0.5
                local round=0
                local force=0
                while ps -p $pid >/dev/null 2>&1; do
                    sleep 1
                    round=$(( round+1 ))
                    if [ $round -eq 16 ]; then
                        if [ $force -eq 0 ]; then
                            round=8
                            force=1
                            kill -9 $pid >/dev/null 2>&1 || :
                            sleep 0.5
                        else
                            return 1
                        fi
                    fi
                done
            elif ps -p $pid >/dev/null 2>&1; then
                wsrep_log_warning "Unable to kill PID=$pid ($pid_file)"
                return 1
            fi
        fi
    fi

[ -n "$pid_file" -a -f "$pid_file" ] && rm -f "$pid_file" || :
    [ -n "$config" -a -f "$config" ] && rm -f "$config" || :

return 0
}

nproc=""

get_proc()
{
    if [ -z "$nproc" ]; then
        set +e
        if [ "$OS" = 'Linux' ]; then
            nproc=$(grep -cw -E '^processor' /proc/cpuinfo 2>/dev/null)
        elif [ "$OS" = 'Darwin' -o "$OS" = 'FreeBSD' ]; then
            nproc=$(sysctl -n hw.ncpu)
        fi
        set -e
        if [ -z "$nproc" ] || [ $nproc -eq 0 ]; then
            nproc=1
        fi
    fi
}

check_server_ssl_config()
{
    # backward-compatible behavior:
    tcert=$(parse_cnf 'sst' 'tca')
    tcap=$(parse_cnf 'sst' 'tcapath')
    tpem=$(parse_cnf 'sst' 'tcert')
    tkey=$(parse_cnf 'sst' 'tkey')
    # reading new ssl configuration options:
    local tcert2=$(parse_cnf "$encgroups" 'ssl-ca')
    local tcap2=$(parse_cnf "$encgroups" 'ssl-capath')
    local tpem2=$(parse_cnf "$encgroups" 'ssl-cert')
    local tkey2=$(parse_cnf "$encgroups" 'ssl-key')
    # if there are no old options, then we take new ones:
    if [ -z "$tcert" -a -z "$tcap" -a -z "$tpem" -a -z "$tkey" ]; then
        tcert="$tcert2"
        tcap="$tcap2"
        tpem="$tpem2"
        tkey="$tkey2"
    # checking for presence of the new-style SSL configuration:
    elif [ -n "$tcert2" -o -n "$tcap2" -o -n "$tpem2" -o -n "$tkey2" ]; then
        if [ "$tcert" != "$tcert2" -o \
             "$tcap"  != "$tcap2"  -o \
             "$tpem"  != "$tpem2"  -o \
             "$tkey"  != "$tkey2" ]
        then
            wsrep_log_info \
               "new ssl configuration options (ssl-ca[path], ssl-cert" \
               "and ssl-key) are ignored by SST due to presence" \
               "of the tca[path], tcert and/or tkey in the [sst] section"
        fi
    fi
    if [ -n "$tcert" ]; then
        if [ "${tcert%/}" != "$tcert" -o -d "$tcert" ]; then
            tcap="$tcert"
            tcert=""
        fi
    fi
}

simple_cleanup()
{
    # Since this is invoked just after exit NNN
    local estatus=$?
    if [ $estatus -ne 0 ]; then
        wsrep_log_error "Cleanup after exit with status: $estatus"
    fi
    if [ -n "${SST_PID:-}" ]; then
        [ "$(pwd)" != "$OLD_PWD" ] && cd "$OLD_PWD"
        [ -f "$SST_PID" ] && rm -f "$SST_PID" || :
    fi
    exit $estatus
}

wsrep_log_info "$WSREP_METHOD $WSREP_TRANSFER_TYPE started on $WSREP_SST_OPT_ROLE"

[+] ..
[-] scsi_mandat [edit]
[-] bzmore [edit]
[-] x86_64-linux-gnu-gcov-dump [edit]
[-] perl5.30.0 [edit]
[-] dh_dwz [edit]
[-] stty [edit]
[-] less [edit]
[-] comm [edit]
[-] msgexec [edit]
[-] dd [edit]
[-] sg_opcodes [edit]
[-] setlogcons [edit]
[-] sg_get_config [edit]
[-] zless [edit]
[-] dh_bugfiles [edit]
[-] linux-boot-prober [edit]
[-] aa-enabled [edit]
[-] vcs-run [edit]
[-] prove [edit]
[-] dpkg-parsechangelog [edit]
[-] prlimit [edit]
[-] grub-editenv [edit]
[-] pygettext3.8 [edit]
[-] vim.basic [edit]
[-] byobu-launcher-install [edit]
[-] iconv [edit]
[-] patch [edit]
[-] chardetect3 [edit]
[-] pl2pm [edit]
[-] ntfsfix [edit]
[-] systemd-tmpfiles [edit]
[-] dh_auto_configure [edit]
[-] sudoedit [edit]
[-] jsonpatch-jsondiff [edit]
[-] systemd-notify [edit]
[-] flock [edit]
[-] apt-cdrom [edit]
[-] mktemp [edit]
[-] dh_perl_dbi [edit]
[-] aria_ftdump [edit]
[-] growpart [edit]
[-] htdbm [edit]
[-] po2debconf [edit]
[-] phar.phar7.4 [edit]
[-] col [edit]
[-] pkaction [edit]
[-] py3compile [edit]
[-] dbiprof [edit]
[-] volname [edit]
[-] ntfscmp [edit]
[-] from [edit]
[-] dbus-run-session [edit]
[-] x86_64-linux-gnu-ar [edit]
[-] pr [edit]
[-] x86_64-linux-gnu-gcc-ar [edit]
[-] systemd-detect-virt [edit]
[-] pyjwt3 [edit]
[-] busctl [edit]
[-] run-one [edit]
[-] vim.tiny [edit]
[-] dh_installmodules [edit]
[-] funzip [edit]
[-] unicode_start [edit]
[-] nisdomainname [edit]
[-] dh_auto_build [edit]
[-] ssh-keyscan [edit]
[-] join [edit]
[-] x86_64-linux-gnu-gcc-nm [edit]
[-] g++-9 [edit]
[-] logger [edit]
[-] script [edit]
[-] pod2text [edit]
[-] fwupdmgr [edit]
[-] tabs [edit]
[-] python3 [edit]
[-] unzip [edit]
[-] sg_stream_ctl [edit]
[-] gpg-agent [edit]
[-] grog [edit]
[-] host [edit]
[-] snapfuse [edit]
[-] phar7.4 [edit]
[-] uname [edit]
[-] x86_64-linux-gnu-ld.bfd [edit]
[-] debconf-show [edit]
[-] setupcon [edit]
[-] pkmon [edit]
[-] bzip2recover [edit]
[-] base32 [edit]
[-] timeout [edit]
[-] nsupdate [edit]
[-] sg_get_lba_status [edit]
[-] symcryptrun [edit]
[-] git-upload-archive [edit]
[-] sg_sat_identify [edit]
[-] zipinfo [edit]
[-] dh_auto_install [edit]
[-] cautious-launcher [edit]
[-] phpize8.0 [edit]
[-] psfstriptable [edit]
[-] automake-1.16 [edit]
[-] resolve_stack_dump [edit]
[-] mtr-packet [edit]
[-] sleep [edit]
[-] dh_lintian [edit]
[-] perror [edit]
[-] mysqlshow [edit]
[-] debconf-set-selections [edit]
[-] sg_requests [edit]
[-] lsinitramfs [edit]
[-] nm [edit]
[-] nawk [edit]
[-] cmp [edit]
[-] more [edit]
[-] lzgrep [edit]
[-] lsns [edit]
[-] ckbcomp [edit]
[-] systemd-id128 [edit]
[-] dh_installmenu [edit]
[-] aria_read_log [edit]
[-] dh_phpcomposer [edit]
[-] scsi_logging_level [edit]
[-] mysqld_multi [edit]
[-] kernel-install [edit]
[-] autoscan [edit]
[-] lslogins [edit]
[-] dircolors [edit]
[-] scsi_stop [edit]
[-] sg_write_x [edit]
[-] grub-kbdcomp [edit]
[-] ntfs-3g.probe [edit]
[-] ping [edit]
[-] pbget [edit]
[-] gcc [edit]
[-] pgrep [edit]
[-] msginit [edit]
[-] byobu-enable [edit]
[-] x86_64-linux-gnu-elfedit [edit]
[-] dir [edit]
[-] pkcon [edit]
[-] stdbuf [edit]
[-] setmetamode [edit]
[-] getent [edit]
[-] podebconf-display-po [edit]
[-] sg_timestamp [edit]
[-] ntfsdecrypt [edit]
[-] chage [edit]
[-] awk [edit]
[-] dh_installppp [edit]
[-] git-upload-pack [edit]
[-] rcp [edit]
[-] sg_rtpg [edit]
[-] systemd-ask-password [edit]
[-] encguess [edit]
[-] bash [edit]
[-] numfmt [edit]
[-] sbverify [edit]
[-] aria_pack [edit]
[-] rvim [edit]
[-] systemd-cgtop [edit]
[-] inotifywait [edit]
[-] dh_testroot [edit]
[-] sg_read_attr [edit]
[-] unexpand [edit]
[-] byobu-keybindings [edit]
[-] run-one-constantly [edit]
[-] linux-version [edit]
[-] x86_64-linux-gnu-gcc [edit]
[-] cal [edit]
[-] x86_64-linux-gnu-gcov-tool-9 [edit]
[-] gcov-9 [edit]
[-] mv [edit]
[-] rlogin [edit]
[-] arch [edit]
[-] file [edit]
[-] gprof [edit]
[-] lspci [edit]
[-] dpkg-genbuildinfo [edit]
[-] utmpdump [edit]
[-] gold [edit]
[-] sg_test_rwbuf [edit]
[-] mysql_setpermission [edit]
[-] linux-update-symlinks [edit]
[-] scp [edit]
[-] grub-mkfont [edit]
[-] dh_systemd_start [edit]
[-] autom4te [edit]
[-] logresolve [edit]
[-] groups [edit]
[-] dh_installdocs [edit]
[-] shtool [edit]
[-] false [edit]
[-] nano [edit]
[-] sg_ses_microcode [edit]
[-] [ [edit]
[-] scsi_readcap [edit]
[-] dbus-monitor [edit]
[-] prtstat [edit]
[-] sg_logs [edit]
[-] vmtoolsd [edit]
[-] ubuntu-distro-info [edit]
[-] bzfgrep [edit]
[-] socat [edit]
[-] x86_64-linux-gnu-ranlib [edit]
[-] clear_console [edit]
[-] head [edit]
[-] dh_ucf [edit]
[-] size [edit]
[-] zegrep [edit]
[-] dh_prep [edit]
[-] kmodsign [edit]
[-] rm [edit]
[-] tput [edit]
[-] col2 [edit]
[-] gpg-zip [edit]
[-] mysqlanalyze [edit]
[-] aa-exec [edit]
[-] users [edit]
[-] fuser [edit]
[-] man [edit]
[-] linux-check-removal [edit]
[-] networkd-dispatcher [edit]
[-] systemd-mount [edit]
[-] mysql_install_db [edit]
[-] ntfscat [edit]
[-] dh_gconf [edit]
[-] resolveip [edit]
[-] calendar [edit]
[-] ld [edit]
[-] fcgistarter [edit]
[-] ld.gold [edit]
[-] lexgrog [edit]
[-] ssh-keygen [edit]
[-] dh_clean [edit]
[-] captoinfo [edit]
[-] ctail [edit]
[-] nroff [edit]
[-] free [edit]
[-] checkgid [edit]
[-] objdump [edit]
[-] php8.0 [edit]
[-] mysql_convert_table_format [edit]
[-] sg_read_long [edit]
[-] udevadm [edit]
[-] mysqld_safe_helper [edit]
[-] tee [edit]
[-] mtrace [edit]
[-] php7.4 [edit]
[-] gpgtar [edit]
[-] unzipsfx [edit]
[-] systemd-cgls [edit]
[-] gpg [edit]
[-] printf [edit]
[-] pwdx [edit]
[-] usbhid-dump [edit]
[-] ntfsfallocate [edit]
[-] sos-collector [edit]
[-] sg_referrals [edit]
[-] mkdir [edit]
[-] ipcs [edit]
[-] sg_prevent [edit]
[-] dbus-update-activation-environment [edit]
[-] unlz4 [edit]
[-] tac [edit]
[-] lzfgrep [edit]
[-] top [edit]
[-] dh_installdebconf [edit]
[-] expr [edit]
[-] ftp [edit]
[-] mysqldump [edit]
[-] manpath [edit]
[-] see [edit]
[-] gpgv [edit]
[-] btrfs-image [edit]
[-] dh_installmanpages [edit]
[-] ulockmgr_server [edit]
[-] byobu-shell [edit]
[-] killall [edit]
[-] ptx [edit]
[-] dmesg [edit]
[-] dh_install [edit]
[-] sg_copy_results [edit]
[-] ptardiff [edit]
[-] enc2xs [edit]
[-] setfont [edit]
[-] chown [edit]
[-] telnet [edit]
[-] keep-one-running [edit]
[-] fold [edit]
[-] do-release-upgrade [edit]
[-] odbcinst [edit]
[-] apt [edit]
[-] dpkg-gencontrol [edit]
[-] update-mime-database [edit]
[-] make-first-existing-target [edit]
[-] xdg-user-dirs-update [edit]
[-] lorder [edit]
[-] pcre2-config [edit]
[-] touch [edit]
[-] uncompress [edit]
[-] x86_64-linux-gnu-g++-9 [edit]
[-] pidof [edit]
[-] json_pp [edit]
[-] xzfgrep [edit]
[-] sg_sat_read_gplog [edit]
[-] networkctl [edit]
[-] login [edit]
[-] xdg-user-dir [edit]
[-] dh_installinfo [edit]
[-] dh_listpackages [edit]
[-] grub-menulst2cfg [edit]
[-] fallocate [edit]
[-] x86_64-linux-gnu-strip [edit]
[-] pkttyagent [edit]
[-] dpkg-gensymbols [edit]
[-] readlink [edit]
[-] as [edit]
[-] grub-script-check [edit]
[-] nl [edit]
[-] dig [edit]
[-] x86_64-linux-gnu-size [edit]
[-] resizepart [edit]
[-] keyring [edit]
[-] gcov [edit]
[-] shred [edit]
[-] phar7.4.phar [edit]
[-] mysql_tzinfo_to_sql [edit]
[-] gpgsplit [edit]
[-] dpkg [edit]
[-] ip [edit]
[-] peekfd [edit]
[-] libtoolize [edit]
[-] systemd-sysusers [edit]
[-] dh_installmime [edit]
[-] dh_icons [edit]
[-] snice [edit]
[-] at [edit]
[-] htop [edit]
[-] sg_format [edit]
[-] ls [edit]
[-] cloud-id [edit]
[-] crontab [edit]
[-] scsi_satl [edit]
[-] grops [edit]
[-] scsi_temperature [edit]
[-] ping4 [edit]
[-] xxd [edit]
[-] apport-collect [edit]
[-] grub-mklayout [edit]
[-] mysqldumpslow [edit]
[-] colcrt [edit]
[-] wsrep_sst_rsync_wan [edit]
[-] debconf-apt-progress [edit]
[-] apt-mark [edit]
[-] dpkg-name [edit]
[-] pic [edit]
[-] sensible-pager [edit]
[-] dh_installtmpfiles [edit]
[-] gcc-nm-9 [edit]
[-] aulastlog [edit]
[-] envsubst [edit]
[-] perldoc [edit]
[-] fwupdate [edit]
[-] gpg-wks-server [edit]
[-] uuidparse [edit]
[-] localedef [edit]
[-] x86_64-linux-gnu-addr2line [edit]
[-] systemd-umount [edit]
[-] uptime [edit]
[-] hwe-support-status [edit]
[-] run-one-until-failure [edit]
[-] htpasswd [edit]
[-] mariadb [edit]
[-] myisamchk [edit]
[-] id [edit]
[-] tkconch3 [edit]
[-] on_ac_power [edit]
[-] acpi_listen [edit]
[-] aulast [edit]
[-] sg_stpg [edit]
[-] savelog [edit]
[-] x86_64-linux-gnu-pkg-config [edit]
[-] skill [edit]
[-] x86_64-linux-gnu-gold [edit]
[-] mysqlbinlog [edit]
[-] mysqlslap [edit]
[-] piconv [edit]
[-] watch [edit]
[-] byobu-prompt [edit]
[-] md5sum [edit]
[-] delpart [edit]
[-] cp [edit]
[-] splain [edit]
[-] btrfstune [edit]
[-] locale [edit]
[-] x86_64-linux-gnu-gcov-9 [edit]
[-] pico [edit]
[-] deb-systemd-invoke [edit]
[-] test [edit]
[-] msggrep [edit]
[-] vmware-vgauth-cmd [edit]
[-] mysqlcheck [edit]
[-] fakeroot [edit]
[-] view [edit]
[-] dh_auto_test [edit]
[-] systemd-analyze [edit]
[-] debian-distro-info [edit]
[-] ausyscall [edit]
[-] instmodsh [edit]
[-] php-config.default [edit]
[-] phar.phar8.0 [edit]
[-] ctstat [edit]
[-] dbus-daemon [edit]
[-] atrm [edit]
[-] md5sum.textutils [edit]
[-] sg_emc_trespass [edit]
[-] lsmod [edit]
[-] byobu-launcher-uninstall [edit]
[-] sg_write_buffer [edit]
[-] sg_persist [edit]
[-] ed [edit]
[-] phar.phar [edit]
[-] readelf [edit]
[-] byobu-disable-prompt [edit]
[-] unicode_stop [edit]
[-] gapplication [edit]
[-] gpic [edit]
[-] ischroot [edit]
[-] install-info [edit]
[-] xargs [edit]
[-] systemd-inhibit [edit]
[-] tset [edit]
[-] galera_recovery [edit]
[-] pollinate [edit]
[-] fusermount [edit]
[-] sg_senddiag [edit]
[-] infotocap [edit]
[-] getkeycodes [edit]
[-] zcat [edit]
[-] grub-mkstandalone [edit]
[-] yes [edit]
[-] pkgtools [edit]
[-] ln [edit]
[-] showconsolefont [edit]
[-] git [edit]
[-] x86_64-linux-gnu-ld [edit]
[-] autopoint [edit]
[-] myisam_ftdump [edit]
[-] dpkg-deb [edit]
[-] nproc [edit]
[-] ubuntu-bug [edit]
[-] catman [edit]
[-] cat [edit]
[-] lowntfs-3g [edit]
[-] mariadb-check [edit]
[-] check-language-support [edit]
[-] dbiproxy [edit]
[-] dh_md5sums [edit]
[-] grub-mkrelpath [edit]
[-] ul [edit]
[-] dbus-send [edit]
[-] gettext [edit]
[-] rtstat [edit]
[-] sg_wr_mode [edit]
[-] rotatelogs [edit]
[-] dh_autoreconf [edit]
[-] grub-file [edit]
[-] select-editor [edit]
[-] seq [edit]
[-] deb-systemd-helper [edit]
[-] tic [edit]
[-] isql [edit]
[-] dh_installgsettings [edit]
[-] btrfsck [edit]
[-] cpp [edit]
[-] pinky [edit]
[-] addr2line [edit]
[-] uuidgen [edit]
[-] wifi-status [edit]
[-] dpkg-maintscript-helper [edit]
[-] h2ph [edit]
[-] time [edit]
[-] cut [edit]
[-] bootctl [edit]
[-] pstree [edit]
[-] dh_installemacsen [edit]
[-] dh_installwm [edit]
[-] lnstat [edit]
[-] vmware-hgfsclient [edit]
[-] ssh-agent [edit]
[-] grub-mkpasswd-pbkdf2 [edit]
[-] byobu-reconnect-sockets [edit]
[-] dh_installudev [edit]
[-] runcon [edit]
[-] x86_64 [edit]
[-] tty [edit]
[-] x86_64-linux-gnu-gprof [edit]
[-] sg_verify [edit]
[-] zmore [edit]
[-] my_print_defaults [edit]
[-] zgrep [edit]
[-] procan [edit]
[-] pkill [edit]
[-] bashbug [edit]
[-] vmware-checkvm [edit]
[-] uniq [edit]
[-] ucf [edit]
[-] dh_missing [edit]
[-] look [edit]
[-] pwd [edit]
[-] autoheader [edit]
[-] hostid [edit]
[-] paste [edit]
[-] zipdetails [edit]
[-] sftp [edit]
[-] xzcmp [edit]
[-] mcookie [edit]
[-] run-this-one [edit]
[-] ipcmk [edit]
[-] lzless [edit]
[-] routel [edit]
[-] make [edit]
[-] wdctl [edit]
[-] lzcat [edit]
[-] ab [edit]
[-] sg_reassign [edit]
[-] ckeygen3 [edit]
[-] ping6 [edit]
[-] mysqladmin [edit]
[-] zdiff [edit]
[-] dh_systemd_enable [edit]
[-] pygettext3 [edit]
[-] truncate [edit]
[-] x86_64-linux-gnu-dwp [edit]
[-] vimdiff [edit]
[-] c++filt [edit]
[-] mksquashfs [edit]
[-] inotifywatch [edit]
[-] mysqlaccess [edit]
[-] systemd-escape [edit]
[-] pathchk [edit]
[-] dwp [edit]
[-] kbxutil [edit]
[-] ssh-import-id-lp [edit]
[-] ex [edit]
[-] sbattach [edit]
[-] lsmem [edit]
[-] mandb [edit]
[-] pecl [edit]
[-] nohup [edit]
[-] ntfscluster [edit]
[-] dpkg-split [edit]
[-] msgcomm [edit]
[-] automake [edit]
[-] unlink [edit]
[-] col9 [edit]
[-] b2sum [edit]
[-] timedatectl [edit]
[-] deallocvt [edit]
[-] kmod [edit]
[-] byobu-config [edit]
[-] php-config [edit]
[-] tr [edit]
[-] mysql_waitpid [edit]
[-] validate-json [edit]
[-] taskset [edit]
[-] gunzip [edit]
[-] screendump [edit]
[-] sdiff [edit]
[-] vimtutor [edit]
[-] diff3 [edit]
[-] sg_sat_phy_event [edit]
[-] dh_installsystemd [edit]
[-] systemd-stdio-bridge [edit]
[-] sginfo [edit]
[-] pdb3 [edit]
[-] dpkg-shlibdeps [edit]
[-] gdbus [edit]
[-] stat [edit]
[-] mysql_fix_extensions [edit]
[-] sg_safte [edit]
[-] vmware-vmblock-fuse [edit]
[-] debconf-communicate [edit]
[-] byobu-silent [edit]
[-] vmhgfs-fuse [edit]
[-] ssh-import-id-gh [edit]
[-] bzgrep [edit]
[-] netstat [edit]
[-] xsubpp [edit]
[-] vigpg [edit]
[-] dpkg-mergechangelogs [edit]
[-] byobu-quiet [edit]
[-] ssh-argv0 [edit]
[-] fgrep [edit]
[-] lesskey [edit]
[-] run-mailcap [edit]
[-] shuf [edit]
[-] chsh [edit]
[-] jsondiff [edit]
[-] factor [edit]
[-] env [edit]
[-] openvt [edit]
[-] telnet.netkit [edit]
[-] dpkg-trigger [edit]
[-] msgcmp [edit]
[-] fwupdtpmevlog [edit]
[-] debconf-gettextize [edit]
[-] rsh [edit]
[-] rpcgen [edit]
[-] gio [edit]
[-] dpkg-distaddfile [edit]
[-] dh_auto_clean [edit]
[-] sg_dd [edit]
[-] bsd-from [edit]
[-] podchecker [edit]
[-] update-alternatives [edit]
[-] ucfq [edit]
[-] gcov-dump [edit]
[-] tsort [edit]
[-] x86_64-linux-gnu-objcopy [edit]
[-] cvtsudoers [edit]
[-] printerbanner [edit]
[-] dpkg-buildflags [edit]
[-] byobu-select-backend [edit]
[-] mytop [edit]
[-] du [edit]
[-] pmap [edit]
[-] resizecons [edit]
[-] btrfs-find-root [edit]
[-] x86_64-linux-gnu-objdump [edit]
[-] dh_installinit [edit]
[-] slogin [edit]
[-] sg_read_buffer [edit]
[-] sg_raw [edit]
[-] showkey [edit]
[-] x86_64-linux-gnu-gcc-ar-9 [edit]
[-] debconf-copydb [edit]
[-] sg_inq [edit]
[-] unmkinitramfs [edit]
[-] ntfsusermap [edit]
[-] sg_ses [edit]
[-] msql2mysql [edit]
[-] dbilogstrip [edit]
[-] innotop [edit]
[-] pastebinit [edit]
[-] gpgconf [edit]
[-] split [edit]
[-] bunzip2 [edit]
[-] dbus-uuidgen [edit]
[-] sg_turs [edit]
[-] hibinit-agent [edit]
[-] bsd-write [edit]
[-] vmstat [edit]
[-] unattended-upgrades [edit]
[-] c89-gcc [edit]
[-] sg_write_long [edit]
[-] dh_installlogrotate [edit]
[-] xzmore [edit]
[-] lz4c [edit]
[-] strace-log-merge [edit]
[-] miniterm [edit]
[-] csplit [edit]
[-] loadkeys [edit]
[-] ntfsrecover [edit]
[-] kbdinfo [edit]
[-] gettextize [edit]
[-] vdir [edit]
[-] btrfs-select-super [edit]
[-] lesspipe [edit]
[-] bzcmp [edit]
[-] mariadb-service-convert [edit]
[-] VGAuthService [edit]
[-] dirmngr [edit]
[-] dh_installlogcheck [edit]
[-] sha512sum [edit]
[-] jsonlint-php [edit]
[-] snap [edit]
[-] c_rehash [edit]
[-] sotruss [edit]
[-] strings [edit]
[-] zfgrep [edit]
[-] netcat [edit]
[-] getconf [edit]
[-] byobu-screen [edit]
[-] byobu-select-session [edit]
[-] update-microcode-initrd [edit]
[-] systemctl [edit]
[-] dpkg-genchanges [edit]
[-] hibagent [edit]
[-] psfaddtable [edit]
[-] sg_write_same [edit]
[-] gcov-tool [edit]
[-] dpkg-divert [edit]
[-] autoupdate [edit]
[-] dfu-tool [edit]
[-] nc.openbsd [edit]
[-] znew [edit]
[-] enable-ec2-spot-hibernation [edit]
[-] msgmerge [edit]
[-] c++ [edit]
[-] byobu-ugraph [edit]
[-] wall [edit]
[-] dh_installdirs [edit]
[-] aclocal [edit]
[-] dh_gencontrol [edit]
[-] cpp-9 [edit]
[-] echo [edit]
[-] xzdiff [edit]
[-] systemd-hwdb [edit]
[-] dh_autotools-dev_restoreconfig [edit]
[-] dpkg-scanpackages [edit]
[-] zforce [edit]
[-] landscape-sysinfo [edit]
[-] apt-config [edit]
[-] unattended-upgrade [edit]
[-] sos [edit]
[-] usb-devices [edit]
[-] pod2html [edit]
[-] debconf [edit]
[-] nice [edit]
[-] grub-render-label [edit]
[-] distro-info [edit]
[-] sbkeysync [edit]
[-] lzegrep [edit]
[-] dh_perl [edit]
[-] col7 [edit]
[-] conch3 [edit]
[-] editor [edit]
[-] grub-mknetdir [edit]
[-] setterm [edit]
[-] ssh [edit]
[-] NF [edit]
[-] msgfilter [edit]
[-] dh_installifupdown [edit]
[-] pydoc3.8 [edit]
[-] ntfsmove [edit]
[-] dh_installxfonts [edit]
[-] sha1sum [edit]
[-] sensible-editor [edit]
[-] openssl [edit]
[-] jsonpatch [edit]
[-] dh_installpam [edit]
[-] helpztags [edit]
[-] ngettext [edit]
[-] logname [edit]
[-] systemd-resolve [edit]
[-] pager [edit]
[-] wsrep_sst_rsync [edit]
[-] systemd-socket-activate [edit]
[-] mysqlimport [edit]
[-] mk_modmap [edit]
[-] dumpkeys [edit]
[-] ifnames [edit]
[-] autoreconf [edit]
[-] ssh-add [edit]
[-] ec2metadata [edit]
[-] diff [edit]
[-] rrsync [edit]
[-] mysql [edit]
[-] sync [edit]
[-] msgconv [edit]
[-] sg_sanitize [edit]
[-] dh [edit]
[-] apt-key [edit]
[-] ubuntu-advantage [edit]
[-] od [edit]
[-] troff [edit]
[-] setleds [edit]
[-] byobu-status-detail [edit]
[-] linux64 [edit]
[-] sudo [edit]
[-] x86_64-linux-gnu-gcc-ranlib-9 [edit]
[-] ntfswipe [edit]
[-] aria_chk [edit]
[-] systemd [edit]
[-] base64 [edit]
[-] pftp [edit]
[-] whoami [edit]
[-] vim [edit]
[-] zcmp [edit]
[-] tar [edit]
[-] findmnt [edit]
[-] infocmp [edit]
[-] strip [edit]
[-] gettext.sh [edit]
[-] slabtop [edit]
[-] dpkg-source [edit]
[-] x86_64-linux-gnu-gcov [edit]
[-] lsof [edit]
[-] col8 [edit]
[-] psfxtable [edit]
[-] eatmydata [edit]
[-] gzip [edit]
[-] dirname [edit]
[-] sgp_dd [edit]
[-] ranlib [edit]
[-] mysqlreport [edit]
[-] static-sh [edit]
[-] x86_64-linux-gnu-cpp [edit]
[-] grub-fstest [edit]
[-] pinentry [edit]
[-] cc [edit]
[-] auvirt [edit]
[-] col5 [edit]
[-] run-parts [edit]
[-] gpgsm [edit]
[-] chmod [edit]
[-] dh_strip_nondeterminism [edit]
[-] chfn [edit]
[-] mt-gnu [edit]
[-] lsattr [edit]
[-] splitfont [edit]
[-] byobu-launch [edit]
[-] ptar [edit]
[-] byobu-export [edit]
[-] scsi_ready [edit]
[-] x86_64-linux-gnu-cpp-9 [edit]
[-] gcc-ar [edit]
[-] scsi_start [edit]
[-] sg_reset_wp [edit]
[-] whatis [edit]
[-] link [edit]
[-] os-prober [edit]
[-] xz [edit]
[-] c89 [edit]
[-] routef [edit]
[-] cksum [edit]
[-] lzmainfo [edit]
[-] rnano [edit]
[-] vmware-xferlogs [edit]
[-] resolvectl [edit]
[-] elfedit [edit]
[-] soelim [edit]
[-] sg_rdac [edit]
[-] batch [edit]
[-] plymouth [edit]
[-] byobu-ctrl-a [edit]
[-] compose [edit]
[-] colrm [edit]
[-] delv [edit]
[-] apport-unpack [edit]
[-] perlivp [edit]
[-] ptargrep [edit]
[-] watchgnupg [edit]
[-] nslookup [edit]
[-] chrt [edit]
[-] mdig [edit]
[-] lscpu [edit]
[-] finalrd [edit]
[-] locale-check [edit]
[-] clear [edit]
[-] sg_reset [edit]
[-] expiry [edit]
[-] fakeroot-tcp [edit]
[-] jsonschema [edit]
[-] byobu-enable-prompt [edit]
[-] sosreport [edit]
[-] sg_unmap [edit]
[-] gencat [edit]
[-] innochecksum [edit]
[-] grotty [edit]
[-] dirmngr-client [edit]
[-] sg_scan [edit]
[-] byobu-launcher [edit]
[-] wsrep_sst_mysqldump [edit]
[-] run-one-until-success [edit]
[-] htcacheclean [edit]
[-] php-config8.0 [edit]
[-] strace [edit]
[-] pdb3.8 [edit]
[-] git-receive-pack [edit]
[-] apt-add-repository [edit]
[-] rename.ul [edit]
[-] unsquashfs [edit]
[-] gpgparsemail [edit]
[-] red [edit]
[-] certbot [edit]
[-] rescan-scsi-bus.sh [edit]
[-] mesg [edit]
[-] galera_new_cluster [edit]
[-] add-apt-repository [edit]
[-] mysql_find_rows [edit]
[-] cpio [edit]
[-] automat-visualize3 [edit]
[-] systemd-run [edit]
[-] lsipc [edit]
[-] peardev [edit]
[-] infobrowser [edit]
[-] mknod [edit]
[-] xzgrep [edit]
[-] msgen [edit]
[-] composer [edit]
[-] vmware-namespace-cmd [edit]
[-] perl [edit]
[-] m4 [edit]
[-] gcc-ranlib [edit]
[-] sg_start [edit]
[-] mysqld_safe [edit]
[-] xzless [edit]
[-] corelist [edit]
[-] ssh-import-id [edit]
[-] bzless [edit]
[-] x86_64-linux-gnu-gcc-9 [edit]
[-] pbput [edit]
[-] crc32 [edit]
[-] date [edit]
[-] wget [edit]
[-] sbsiglist [edit]
[-] purge-old-kernels [edit]
[-] php [edit]
[-] dh_installman [edit]
[-] setpci [edit]
[-] g++ [edit]
[-] ps [edit]
[-] oem-getlogs [edit]
[-] setarch [edit]
[-] byobu-select-profile [edit]
[-] ginstall-info [edit]
[-] write [edit]
[-] whereis [edit]
[-] systemd-delta [edit]
[-] mysql_upgrade [edit]
[-] byobu-ulevel [edit]
[-] atq [edit]
[-] msgunfmt [edit]
[-] dh_installcatalogs [edit]
[-] phar8.0.phar [edit]
[-] x86_64-linux-gnu-readelf [edit]
[-] pldd [edit]
[-] mysql_embedded [edit]
[-] mapscrn [edit]
[-] grub-ntldr-img [edit]
[-] debconf-escape [edit]
[-] dh_installsystemduser [edit]
[-] bzegrep [edit]
[-] systemd-path [edit]
[-] edit [edit]
[-] sg_readcap [edit]
[-] unshare [edit]
[-] dh_builddeb [edit]
[-] col1 [edit]
[-] dh_fixperms [edit]
[-] grub-mkimage [edit]
[-] lcf [edit]
[-] col3 [edit]
[-] dh_installexamples [edit]
[-] dpkg-scansources [edit]
[-] sg_write_verify [edit]
[-] replace [edit]
[-] wsrep_sst_mariabackup [edit]
[-] jsonpointer [edit]
[-] codepage [edit]
[-] tempfile [edit]
[-] df [edit]
[-] dh_autoreconf_clean [edit]
[-] traceroute6.iputils [edit]
[-] sg_map [edit]
[-] sg_decode_sense [edit]
[-] mailmail3 [edit]
[-] dh_compress [edit]
[-] hd [edit]
[-] nsenter [edit]
[-] sum [edit]
[-] vm-support [edit]
[-] shtoolize [edit]
[-] tracepath [edit]
[-] lsblk [edit]
[-] egrep [edit]
[-] reset [edit]
[-] x86_64-linux-gnu-as [edit]
[-] msguniq [edit]
[-] pydoc3 [edit]
[-] journalctl [edit]
[-] ionice [edit]
[-] setkeycodes [edit]
[-] sg_luns [edit]
[-] printenv [edit]
[-] sg_map26 [edit]
[-] grub-mkrescue [edit]
[-] xgettext [edit]
[-] lsusb [edit]
[-] renice [edit]
[-] faked-sysv [edit]
[-] sprof [edit]
[-] autoconf [edit]
[-] setsid [edit]
[-] mysqloptimize [edit]
[-] mkfifo [edit]
[-] phar [edit]
[-] xzcat [edit]
[-] apt-ftparchive [edit]
[-] iscsiadm [edit]
[-] phpize [edit]
[-] i386 [edit]
[-] which [edit]
[-] lzdiff [edit]
[-] tbl [edit]
[-] pkg-config [edit]
[-] msgfmt [edit]
[-] namei [edit]
[-] perl5.30-x86_64-linux-gnu [edit]
[-] boltctl [edit]
[-] iusql [edit]
[-] dpkg-statoverride [edit]
[-] gzexe [edit]
[-] objcopy [edit]
[-] x86_64-linux-gnu-c++filt [edit]
[-] msgattrib [edit]
[-] chgrp [edit]
[-] podselect [edit]
[-] ntfstruncate [edit]
[-] mtr [edit]
[-] sg_sync [edit]
[-] sg_compare_and_write [edit]
[-] zipgrep [edit]
[-] byobu-layout [edit]
[-] lsb_release [edit]
[-] phar8.0 [edit]
[-] grub-syslinux2cfg [edit]
[-] ua [edit]
[-] cloud-init [edit]
[-] dh_installinitramfs [edit]
[-] traceroute6 [edit]
[-] lshw [edit]
[-] sh [edit]
[-] x86_64-linux-gnu-strings [edit]
[-] tload [edit]
[-] debconf-updatepo [edit]
[-] curl [edit]
[-] w.procps [edit]
[-] sg_vpd [edit]
[-] bzip2 [edit]
[-] sg [edit]
[-] lessecho [edit]
[-] sg_xcopy [edit]
[-] myisampack [edit]
[-] aria_dump_log [edit]
[-] h2xs [edit]
[-] htdigest [edit]
[-] snapctl [edit]
[-] cpio-filter [edit]
[-] dh_link [edit]
[-] wc [edit]
[-] dh_bash-completion [edit]
[-] python3.8 [edit]
[-] loadunimap [edit]
[-] gtbl [edit]
[-] rview [edit]
[-] vi [edit]
[-] faillog [edit]
[-] dpkg-query [edit]
[-] vmware-toolbox-cmd [edit]
[-] dh_testdir [edit]
[-] gio-querymodules [edit]
[-] apport-cli [edit]
[-] dpkg-buildpackage [edit]
[-] tmux [edit]
[-] rmdir [edit]
[-] btrfs [edit]
[-] hostname [edit]
[-] toe [edit]
[-] lastb [edit]
[-] ntfs-3g [edit]
[-] cftp3 [edit]
[-] ar [edit]
[-] sg_rmsn [edit]
[-] last [edit]
[-] ldd [edit]
[-] perlthanks [edit]
[-] chardet3 [edit]
[-] pkcheck [edit]
[-] grub-glue-efi [edit]
[-] fwupdagent [edit]
[-] phpize.default [edit]
[-] gcov-dump-9 [edit]
[-] pod2usage [edit]
[-] dpkg-vendor [edit]
[-] lslocks [edit]
[-] col6 [edit]
[-] eject [edit]
[-] dh_movefiles [edit]
[-] who [edit]
[-] bzcat [edit]
[-] grep [edit]
[-] faked-tcp [edit]
[-] gsettings [edit]
[-] hexdump [edit]
[-] col4 [edit]
[-] dpkg-checkbuilddeps [edit]
[-] pyhtmlizer3 [edit]
[-] mawk [edit]
[-] sort [edit]
[-] bzdiff [edit]
[-] ntfsls [edit]
[-] byobu-tmux [edit]
[-] pstree.x11 [edit]
[-] sg_ident [edit]
[-] domainname [edit]
[-] lessfile [edit]
[-] preconv [edit]
[-] loginctl [edit]
[-] partx [edit]
[-] lspgpot [edit]
[-] glib-compile-schemas [edit]
[-] systemd-machine-id-setup [edit]
[-] kbd_mode [edit]
[-] nc [edit]
[-] chattr [edit]
[-] fmt [edit]
[-] iptables-xml [edit]
[-] rgrep [edit]
[-] btrfs-convert [edit]
[-] gpg-connect-agent [edit]
[-] x86_64-linux-gnu-nm [edit]
[-] gpasswd [edit]
[-] shasum [edit]
[-] gcov-tool-9 [edit]
[-] vmware-alias-import [edit]
[-] perlbug [edit]
[-] byobu [edit]
[-] gcc-9 [edit]
[-] neqn [edit]
[-] sbvarsign [edit]
[-] xauth [edit]
[-] byobu-status [edit]
[-] ss [edit]
[-] mt [edit]
[-] ncal [edit]
[-] gresource [edit]
[-] info [edit]
[-] apt-extracttemplates [edit]
[-] fgconsole [edit]
[-] dh_usrlocal [edit]
[-] byobu-janitor [edit]
[-] trial3 [edit]
[-] pbputs [edit]
[-] install [edit]
[-] addpart [edit]
[-] dbus-cleanup-sockets [edit]
[-] dnsdomainname [edit]
[-] tail [edit]
[-] apport-bug [edit]
[-] cpan [edit]
[-] chcon [edit]
[-] dpkg-architecture [edit]
[-] mountpoint [edit]
[-] gcc-ranlib-9 [edit]
[-] sg_read_block_limits [edit]
[-] apt-get [edit]
[-] dh_phppear [edit]
[-] kill [edit]
[-] py3versions [edit]
[-] vmware-rpctool [edit]
[-] rbash [edit]
[-] x86_64-linux-gnu-gcov-dump-9 [edit]
[-] setpriv [edit]
[-] filan [edit]
[-] cloud-init-per [edit]
[-] x86_64-linux-gnu-gcov-tool [edit]
[-] catchsegv [edit]
[-] gcc-ar-9 [edit]
[-] ubuntu-security-status [edit]
[-] cpan5.30-x86_64-linux-gnu [edit]
[-] dh_makeshlibs [edit]
[-] ssh-copy-id [edit]
[-] su [edit]
[-] w [edit]
[-] zdump [edit]
[-] nstat [edit]
[-] sg_bg_ctl [edit]
[-] pslog [edit]
[-] lastlog [edit]
[-] myisamlog [edit]
[-] umount [edit]
[-] gawk [edit]
[-] recode-sr-latin [edit]
[-] mysql_secure_installation [edit]
[-] systemd-tty-ask-password-agent [edit]
[-] migrate-pubring-from-classic-gpg [edit]
[-] sha384sum [edit]
[-] twistd3 [edit]
[-] chvt [edit]
[-] dash [edit]
[-] sgm_dd [edit]
[-] groff [edit]
[-] scriptreplay [edit]
[-] pod2man [edit]
[-] lzma [edit]
[-] lz4 [edit]
[-] busybox [edit]
[-] systemd-cat [edit]
[-] gpgcompose [edit]
[-] choom [edit]
[-] lz4cat [edit]
[-] x86_64-linux-gnu-gcc-ranlib [edit]
[-] pkexec [edit]
[-] dwz [edit]
[-] eqn [edit]
[-] expand [edit]
[-] fwupdtool [edit]
[-] x86_64-linux-gnu-gcc-nm-9 [edit]
[-] sed [edit]
[-] lzcmp [edit]
[-] py3clean [edit]
[-] pinentry-curses [edit]
[-] find [edit]
[-] mysqlrepair [edit]
[-] ypdomainname [edit]
[-] linux32 [edit]
[-] rev [edit]
[-] x86_64-linux-gnu-g++ [edit]
[-] podebconf-report-po [edit]
[-] newgrp [edit]
[-] ld.bfd [edit]
[-] grub-mount [edit]
[-] byobu-disable [edit]
[-] bc [edit]
[-] xzegrep [edit]
[-] usbreset [edit]
[-] aclocal-1.16 [edit]
[-] c99-gcc [edit]
[-] hostnamectl [edit]
[-] sbsign [edit]
[-] screen [edit]
[-] unlzma [edit]
[-] basename [edit]
[-] x86_64-pc-linux-gnu-pkg-config [edit]
[-] tzselect [edit]
[-] rsync [edit]
[-] ntfsinfo [edit]
[-] whiptail [edit]
[-] mysqlhotcopy [edit]
[-] c99 [edit]
[-] mysql_plugin [edit]
[-] ucfr [edit]
[-] sg_zone [edit]
[-] twist3 [edit]
[-] fincore [edit]
[-] geqn [edit]
[-] dh_update_autotools_config [edit]
[-] sudoreplay [edit]
[-] localectl [edit]
[-] psfgettable [edit]
[-] true [edit]
[-] manifest [edit]
[-] dh_shlibdeps [edit]
[-] git-shell [edit]
[-] fakeroot-sysv [edit]
[-] sha224sum [edit]
[-] man-recode [edit]
[-] print [edit]
[-] realpath [edit]
[-] ltrace [edit]
[-] unxz [edit]
[-] sg_sat_set_features [edit]
[-] dh_installdeb [edit]
[-] column [edit]
[-] lzmore [edit]
[-] ipcrm [edit]
[-] dh_autotools-dev_updateconfig [edit]
[-] bzexe [edit]
[-] pear [edit]
[-] sg_read [edit]
[-] apt-cache [edit]
[-] sg_rbuf [edit]
[-] mount [edit]
[-] getopt [edit]
[-] dh_installcron [edit]
[-] sg_modes [edit]
[-] apt-sortpkgs [edit]
[-] netkit-ftp [edit]
[-] dh_installchangelogs [edit]
[-] ntfssecaudit [edit]
[-] wsrep_sst_common [edit]
[-] x86_64-linux-gnu-ld.gold [edit]
[-] msgcat [edit]
[-] passwd [edit]
[-] sha256sum [edit]
[-] sg_rep_zones [edit]
[-] gcc-nm [edit]
[-] dh_strip [edit]
[-] sensible-browser [edit]
[-] libnetcfg [edit]
[-] rdma [edit]
[-] btrfs-map-logical [edit]
[-] apropos [edit]
[-] sg_seek [edit]